manualshive.com logo in svg

Multitech MT1932ZDX, Краткое руководство пользователя

Поделиться
Скачать
Multitech MT1932ZDX Скачать руководство пользователя страница 62

62

MT1932ZDX Quick Reference Guide

3. OTHER RESTRICTIONS.  The software may not be assigned,
sublicensed, translated or otherwise transferred by Customer without prior
written consent from MTS. Customer may not reverse engineer, decompile,
or disassemble the software. Any updates shall be used only on the
Licensed System, and shall remain subject to all other terms of this
Agreement. Customer agrees not to provide or otherwise make available
the software including, but not limited to documentation, programs listings,
object code, or source code, in any form, to any person other than
Customer and his employees and /or agents, without prior written consent
from MTS. Customer acknowledges that the techniques, algorithms, and
processes contained in the software are proprietary to MTS and Customer
agrees not to use or disclose such information except as necessary to use
the software.

Customer shall take reasonable steps consistent with steps taken to
protect its own proprietary information to prevent the unauthorized copying
or use by third parties of the software or any of the other materials provided
under this Agreement. Any previous version of the software should be
destroyed or returned to Multi-Tech Systems, Inc. within 90 days of receipt
of the software upgrade or update.

4. WARRANTY.  MTS warrants that the software will perform substantially
in accordance to the product specifications in effect at the time of receipt
by Customer. If it fails to perform accordingly, MTS will optionally repair any
defect, or replace it. This warranty is void if the failure has resulted from
accident, abuse, or misapplication. A signed Software Registration Card
must be on file at MTS for this warranty to be in effect.

THE FOREGOING WARRANTY IS IN LIEU ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, AND ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE HEREBY DISCLAIMED. IN NO EVENT WILL MTS BE LIABLE FOR
CONSEQUENTIAL DAMAGES RESULTING FROM USE OF THE
LICENSED PROGRAM, WHETHER AS A RESULT OF MTS NEGLIGENCE
OR NOT, EVEN IF MTS HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.

Содержание MT1932ZDX



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды