manualshive.com logo in svg

Multitech MT1932ZDX, Краткое руководство пользователя

Поделиться
Скачать
Multitech MT1932ZDX Скачать руководство пользователя страница 78

78

MT1932ZDX Quick Reference Guide

The Multi-Tech BBS

Multi-Tech maintains a bulletin board system (BBS) for its customers.
Information available from the BBS includes new product information,
product upgrade data, and problem-solving tips. There is also a message
service that lets you request additional information. The phone number for
the Multi-Tech BBS is (800) 392-2432 (USA and Canada) or (612) 785-
3702 (international and local).

The BBS can be accessed by any asynchronous modem operating at 1200
bps to 33,600 bps at a setting of 8 bits, no parity, and 1 stop bit (8-N-1).

Logging on to the Multi-Tech BBS

To log on to the Multi-Tech BBS, perform the following steps:

1.

Set your communications program to 8-N-1.

2.

Dial our BBS at (800) 392-2432 (USA and Canada) or (612) 785-3702
(international and local).

3.

At the prompts, type your first name, last name, and password; then
press RETURN. If you are a first time caller, the BBS will ask if your
name is spelled correctly. If you answer yes, a questionnaire will
appear. You must complete the questionnaire to use the BBS on your
first call.

4.

Press RETURN until the Main Menu appears. From the Main Menu
you have access to three main areas: the Files Menu, the Message
Menu, and Bulletins. For help on menu commands, type ?.

Downloading a File

If you know the file name

1.

From the Main Menu, type F to access the Files Menu, then type D.

2.

Enter the name of the file you wish to download from the BBS.

3.

If a password is required, enter the password.

Содержание MT1932ZDX



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды