32
MT1932ZDX Quick Reference Guide
Command:
D
s
N
d
Store Telephone Number
Values:
s
= dial string (phone number and dial modifiers)
d
= 0 or 1
Default:
none
Description:
To store, enter D followed by dial string
s
, then N
followed by directory number
d
.
Example: ATDT9,5551212N1.
Command:
&D
n
Data Terminal Ready Control
Values:
n
= 0–3
Default:
2 (ZDX, ZDXI, ZDXK)
0 (ZDX-Mac, ZDXK-Mac)
Description:
&D0
Modem ignores DTR signal.
&D1
When DTR drops, the modem hangs up. While
DTR is low, the modem accepts commands but
will not dial or auto-answer until DTR goes high
again.
&D2
Same as &D1.
&D3
When DTR drops, the modem hangs up and
resets as if an ATZ command were issued.
Command:
$D
n
DTR Dialing
Values:
n
= 0 or 1
Default:
0
Description:
$D0
Do not dial when DTR goes high.
$D1
Dial stored number N0 when DTR goes high.
Command:
%DC
n
AT Command Control
Values:
n
= 0 or 1
Default:
0
Description:
%DC0 Command Mode enabled (AT commands).
%DC1 Command Mode disabled (ignores AT commands
after 10 seconds)
Note: The modem will respond to AT%DC for 10 seconds after power-up.
Содержание MT1932ZDX
Страница 1: ...Quick Reference Guide...
