MULTILIFT Ultima S Flex, Руководство пользователя и по обслуживанию

Страница: 20 / 196

20
Ultima S / SL Flex & Pro 3/2019
114060421
Hooklift Multilift Ultima S / SL Flex & Pro
User Manual
H
L
T
min. SFS 300 mm / DIN 240 mm
min. SFS 205 mm / SS 200 mm / DIN 280 mm
Gripping height (H), tunnel height (T) and width (W) of the container can vary from one
container to another. Note that they are country specific dimensions. If there is doubt about
the origin of the container, the tunnel height and width must be checked in order to ensure
that they are compatible with those of the Ultima equipment.
Country specific standard dimension table of the container is on the next page.
If your country is not mentioned on the list, check the matter in your hooklift equipment
technical specifications.
The condition of the container must be checked regularly. Especially if you are going to
use a type of container with which you are not familiar. In particular, check the condition
of the locking points and the condition and position of the lifting hook.
The maximum allowed wear of the lifting hook is 10 % from its nominal diameter. Nominal
diameter must be checked with the hooklift equipment supplier.
The longitudinal rails at the bottom of the container are under heady burden. Carry out
daily checks of these components for wear or damage.
If the container is frozen to the ground, do not pull it loose by using the Ultima hooklift
equipment.Use, for example, a forklift truck.
H
L
T
min. SFS 300 mm / DIN 240 mm
min. SFS 205 mm / SS 200 mm / DIN 280 mm
min. SFS 11.8 in (300 mm) / DIN 9.4 in (240 mm)
min. SFS 8 in (205 mm) / SS 7.9 in (200 mm) / DIN 11 in (280 mm)