manualshive.com logo in svg

MULTILIFT Ultima S Flex, Руководство пользователя и по обслуживанию

Поделиться
Скачать
MULTILIFT Ultima S Flex Скачать руководство пользователя страница 154

154

Ultima S / SL Flex & Pro

3/2019 

114060421

Hooklift Multilift Ultima S / SL Flex & Pro

Service Manual

!

!

Safety

•   Suitable eye and hand protection must be worn whilst carrying out this operation.
•   Ensure suitable containers to hold the amount oil you will be draining are available 

 

before starting this operation.

Environment

•   Ensure oil waste oil is disposed of safely and in accordance with any local 

 

environmental regulations.

 NOTE!

 

Ask the oil supplier for instructions. If you do not receive any 

   

instructions, follow these recommendations:

Procedure

 

1.  Completely empty the oil tank via the drain plug. Clean the oil tank carefully 

 

 

from oil and contamination. On older systems with heavy contamination, it may 

 

 

be necessary to remove the oil tank and flush out with a suitable flushing 

   agent.
 

2.  Completely empty the hydraulic cylinders, tubes, hoses and the suction hose to 

 

 

the pump. 

 

3.  Change the return filter.

 

4.  Fill the tank with new oil via the return filter. Operate all cylinders carefully to 

 

 

ensure that they will be filled with oil. Ensure that the pump is filled all the time. 

 

 

Fill up the tank before it gets empty.

 

5.  Drive for 2 or 3 days.

 

6.  Check that all piston rods of the cylinders are in retracted position. Completely 

 

 

empty the oil tank via the drain plug and change the return filter. Fill up the oil 

 

 

tank with new oil and operate all cylinders carefully to ensure that they will be 

 

 

filled with oil. Ensure that the pump is filled all the time. Check that the oil level 

 

 

in tank remains in correct level.

 NOTE!

 

Synthetic esters can dissolve old contamination. If the 

 

 

performance of the hooklift appears to deteriorate before 

 

 

the oil filter change, inspect the filters and change if necessary.

Содержание Ultima S Flex





































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды