background image

78

MultiModemISDN User Guide

MT128ISA/PCI

Users should ensure for their own protection that the electrical ground connections of the
power utility, telephone lines and internal metallic water pipe system, if present, are
connected together. This precaution may be particularly important in rural areas.

Caution: Users should not attempt to make electrical ground connections themselves,
but should contact the appropriate electric inspection authority or an electrician, as
appropriate.

EMC, Safety and Terminal Directive Compliance

EMC, Safety, and Terminal Directive Compliance

The CE mark is affixed to this product to confirm compliance with the following European
Community Directives:

Council Directive 89/336/EEC of  3 May 1989 on the approximation of the laws of Member
States relating to electromagnetic compatibility.

and

Council Directive 73/23/EEC of 19 February 1973 on the harmonization of the laws of
Member States relating to electrical equipment designed for use within certain voltage limits:

and

Council Directive 98/13/EC of 12 March 1998 on the approximation of the laws of Member
States concerning telecommunications terminal and Satellite earth station equipment.

Содержание MultiModem ISDN MT128ISA-UV






















































































Отзывы: