Multi-Tech MultiModem ISDN MT128ISA-UV, Руководство пользователя

Страница: 38 / 85

39
Chapter 2 - Installation
MT128ISA/PCI
Windows 98 Multilinked Channel Access (CAPI)
If you would like to use multilinking with your CAPI connection, first ensure your ISDN
provider supports this option.
The ports you link must first be enabled through RVS-COM. In this example, RVS ISDN
V.120 modems are used.
1. For RVS-COM to recognize the second channel, it must first be enabled in RVS-COM.
To do this, open the RVS-COM Comm Center.
2. Click the Services tab. In the Virtual COM Ports section of the window, place a check
mark in front of both ports. Associate each port with a unique COM port number (the two
devices must use different COM ports.) Click Apply, then OK.
Next you will need to verify the two modems you’d like to link are installed.
3. Use Start>Settings>Control Panel>Modems. In this example, if two RVS ISDN V.120
modems do not exist, you will need to create a new definition for each of them.
4. To create a new definition, go to Start>Settings>Control Panel>Add. Select Do Not
Detect my modem. I will select it from a list >Next.
5. Click on the Manufacturer RVS Datentechnik. The RVS COM adapters will appear in the
Model column. Select RVS ISDN V.120 from the list and associate it with the COM port
enabled through RVS-COM in step 2 above. Click Next>Finish. If you need to add a
second RVS modem, repeat the process, associating the second modem with the
second COM port defined within RVS-COM.
Now you are ready to set up Dial-Up Networking for this 128K MLP connection.
1. Make a new Dial-Up Connection by clicking:
Start>Programs>Accessories>Communications>Dial-Up Networking. Double-click
Make New Connection and enter a descriptive name for this connection. In the
Connect Using field, select the RVS ISDN V.120 modem and click Next. Enter the
phone number for the remote server. Click Next>Finish.
2. Next, right click on the new CAPI connection. Click on the Multilink tab. Click the Use
additional device radio button. Click Add to select the RVS ISDN #2 modem from the
list box. If the phone number for this second connection/channel is not displayed, enter it
here and click OK.
3. Reopen the 128K MLP Dial-Up Connections Properties window and click the Server
Types tab. Select PPP: Internet, Windows NT Server, Windows 98 as the type of Dial-
Up Server. Click the TCP/IP Settings button to enter the TCP/IP settings for the remote
device. If required, enter the remote server and DNS IP addresses. Click OK, OK, to
return to the Dial-Up Networking window.
You are now ready to make your remote connection through the 128K CAPI interface.
1. Double-click the icon for the Dial-Up Networking connection just created.
2. Right click on the new CAPI Dial-Up Connection. Select Properties. At the prompts,
enter the user name and password for your remote account and click Connect. The
MultiModem ISDN terminal adapter makes the first, and then the second connection in
seconds.