Multi-Tech MultiModem ISDN MT128ISA-UV, Руководство пользователя

Страница: 54 / 85

55
Chapter 2 - Installation
MT128ISA/PCI
4. You will be prompted to set up the area code and phone number for the remote
connection. When complete, click Next.
To use this new Dial-Up Connection, click Dial.
Windows 2000 Multilinked Channel Access (CAPI)
If RVS-COM Comm Center does not appear on the Windows 2000 task bar, launch the
program using Start>Programs>RVS COM Lite.
The CAPI COM ports must be enabled through RVS-COM before setting up the multilinked
CAPI connection. If the RVS-COM modems you plan to link have not been installed do so
before continuing with this process. (To add the modems, use Start>Settings>Control
Panel> Phone and Modem Options>Add as outlined previously in the Windows 2000
installation instructions).
1. To enable the CAPI ports through RVS-COM, open RVS Comm (double click on Comm
Center on the Windows 2000 task bar).
2. Click the Services tab. In the Virtual Modem section of the screen, click on the boxes
associated with the two RVS-COM ports you will be linking. Associate each modem with
a unique COM port. Click Apply, then OK.
Next, you’ll create a Dial-Up connection definition for this connection by modifying the CAPI
Single Channel Access connection created in the previous section.
1. Go to Start>Settings>Network and Dial-Up Connections. Right click on (Your CAPI
Single Access Connection Name).
2. Select Properties. On the General tab, place a check mark in the boxes corresponding
to the 2 RVS ISDN modems you will be linking. Press OK.
To test the connection, press Dial. Your multilinked CAPI devices will connect within
seconds.
ISDN Monitor, ISDN Line Test Tool and Driver Configuration
To use the ISDN monitor, ISDN line test tool and driver configuration functions, run
LINKSTS.EXE. Install this program by selecting Start>Run>LINKSTS.EXE (you mayuse
the browse button to locate this file in the Windows 2000 driver folder). Press OK to install
the program. The LINKSTS program icon will appear on the task bar.
Place the cursor over the program icon on the task bar to display the application name, driver
version number and the monitored ISDN card name.
Right click on the program icon to display options for Configuration, Linetest, Log information
and Exit.
1. Right click on the LINKSTS application icon on the task bar. Select Configuration to
display your current ISDN information