Multi-Tech MultiModem ISDN MT128ISA-UV Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 85

background image

User Guide

P/N 88300350

Models MT128ISA-UV, MT128PCI-SD

MT128PCI-SV

Copyright© 2000 by Multi-Tech Systems, Inc.

All rights reserved. This publication may not be reproduced, in whole or in part, without prior written
permission from Multi-Tech Systems, Inc.

Multi-Tech Systems, Inc. makes no representations or warranties with respect to the contents hereof
and specifically disclaims any implied warranties of merchantability or fitness for any particular pur-
pose. Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make
changes from time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify
any person or organization of such revisions or changes.

Revision

Description

A

Manual released at Revision A.

(1/15/1998)

B

Manual revised to include updates for driver version ( version 2.52 for Windows 95, 98, NT
and version 3.40 for WIndows 2000), PCI adapter support, Windows 98 and Windows 2000
installation instructions.

(1/20/2000)

Trademarks

MultiModem, MultiModemISDN, Multi-Tech, and the Multi-Tech logo are trademarks of Multi-Tech
Systems, Inc.

AT&T is a registered trademark and 5ESS is a trademark of American Telephone and Telegraph.
Microsoft, Windows, Windows 95, Windows 98, Windows NT and Windows 2000 are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All
other trademarks are owned by their respective companies.

Multi-Tech Systems, Inc.

2205 Woodale Drive

Mounds View, Minnesota 55112 U.S.A.

(612) 785-3500 or (800) 328-9717

U. S. FAX 612-785-9874

Technical Support (800) 972-2439

Internet Address: http://www.multitech.com

«
1
2
3
4
...
»

Содержание MultiModem ISDN MT128ISA-UV






















































































Отзывы:

Нет отзывов

Похожие инструкции для MultiModem ISDN MT128ISA-UV

Бренд: RACOM Страницы: 56

Бренд: Sprint Страницы: 78

Бренд: Ebyte Страницы: 22

Бренд: NetComm Страницы: 92

Бренд: NextNet Страницы: 26

FSMODEM-CELLBASE

Бренд: Federal Signal Corporation Страницы: 16

Unlimited Single User Wi-Max USB Modem

Бренд: Globe Internet Страницы: 5

Бренд: Globe Страницы: 12

Бренд: ADTRAN Страницы: 4

Бренд: ADTRAN Страницы: 80

Бренд: DIRECT COMMUNICATIONS Страницы: 2

Бренд: Tahoe Страницы: 36

Бренд: Teledesign Страницы: 107

Бренд: 3Com Страницы: 56

Бренд: 3Com Страницы: 66

Бренд: Redline Communications Страницы: 60

Бренд: Zoom Страницы: 66

HughesNet HT1-00 Series

Бренд: Hughes Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды