Multi-Tech MultiModem ISDN MT128ISA-UV Скачать руководство пользователя страница 7

Страница: 7 / 85

MultiModemISDN User Guide

MT128ISA/PCI

Features

Your internal ISDN PC card features include:

• D Channel protocols including AT&T 5ESS, Nortel DMS-100, US NI-1 & NI2, ETSI and

Japan INS-64.

• Full B Channel protocol set including V.110, V.120, HDLC, X.75 (Transparent T.70NL,

EuroFT), MLP, async to sync PPP conversion and MLP+BOD and voice (V models).

• Bandwidth on demand (BOD) plus MLP Internet connection, RAS and related data

communications capabilities.

• ISDN BRI (2B+D) and analog ports.

• Modem applications support with ISDN throughput and digital transmission quality, e.g.,

PC Anywhere.

• Video conferencing support without extra video CODEC hardware, e.g. Vdonet’s

Vdophone.

• Software implementation of G3 fax and modem capability with no extra hardware required.

• Supports Application Interfaces including WinISDN, CAPI 2.0, Windows Comm (AT

command/S-Register/Result Codes) and NDISWAN Miniport.

• Automatic detection of incoming calls as voice or data (V models).

• Supports Windows 3.1, Windows 95 (OSR-2), Windows 98, Windows NT and Windows

2000 Multilink PPP connection.

• Supports Microsoft ISDN Accelerator Pack or Microsoft Dial-up Networking.

• PnP compatibility.

• Ability to use the same communications software as analog modems.

• AT command ATS30=n, which automatically disconnects the active connection if there is

no data traffic for n x 10 seconds.

• Provides On-line test and Diagnostics tools.

What Is in Your MultiModemISDN Package?

Before installing your terminal adapter, check the package contents to ensure it includes:

• One internal ISDN PC adapter

• Installation Disk(s) for Windows 3.1, Windows 95 Windows 98, Window NT and Windows

2000

• RJ-45 cable (6 ft.) for ISDN connection

• RJ-11 cable for POTS connection (V models only)

• User Guide (this manual - on diskette)

• The Quick Start Guide

• RJ11-BTS adapter (UK only)

• RVS-COM Lite (Model’s MT128PCI-SD/SV only)

If any of these items are missing, please contact Multi-Tech Systems or your dealer/
distributor.

Содержание MultiModem ISDN MT128ISA-UV






















































































Результаты поиска

Содержание MultiModem ISDN MT128ISA-UV

Отзывы:

Похожие инструкции для MultiModem ISDN MT128ISA-UV

Бренды по названию

Популярные бренды

Multi-Tech MultiModem ISDN MT128ISA-UV, Руководство пользователя

Результаты поиска

Содержание MultiModem ISDN MT128ISA-UV

Отзывы:

Похожие инструкции для MultiModem ISDN MT128ISA-UV

Бренды по названию

Популярные бренды