8
Tractor-ECU application
Parameters
56
V5.20170221
31302713-02-EN
The vehicle with the connected machine is operational for a 100m drive and is at the start of the
marked distance.
You have connected a wheel sensor or radar sensor to the terminal.
You have selected the value "Wheel sensor" or "Radar sensor" in the "Speed" parameter.
1.
Open the Tractor ECU application.
2.
Tap "Settings".
3.
Tap
.
4.
Follow the instructions on the display screen.
⇨
You have calibrated the speed sensor.
Calibrating an analog working position sensor
If you have connected an analog working position sensor to the terminal, you have to show the
terminal the position as of which the implement is in working position.
You have connected a work position sensor directly to the terminal or via the signal socket to the
terminal.
You have selected the analogue sensor in the "Sensor type" parameter.
1.
Open the Tractor ECU application.
2.
Tap "Settings".
3.
Move the implement into working position.
4.
Tap
to teach-in the working position on the terminal.
⇨
You have configured the working position sensor.
Tractor geometry
The tractor geometry represents a series of dimensions on the vehicle.
Tractor geometry
8.3.2
Procedure
8.3.3
