6
Connecting and configuring external devices
Connecting sensors to the terminal
38
V5.20170221
31302713-02-EN
1.
- Open the Service application.
2.
Tap "Driver".
3.
Tap "Auxiliary".
4.
Mark "Auxiliary2".
5.
- Confirm.
6.
Restart the terminal.
To configure the button assignment:
You have activated the driver "Auxiliary2"
1.
- Open the Service application.
2.
Tap "Auxiliary".
3.
Tap "Auxiliary Editor".
⇨
If the ISOBUS job computer supports the Auxiliary 2 protocol, a list will appear of the job
computer functions.
⇨
If no list appears, the ISOBUS job computer does not support this protocol.
4.
Tap the function which you want to assign to this button on the joystick.
⇨
A list of the buttons on the joystick will appear.
5.
Select the button to which the selected function should be assigned.
6.
- Confirm.
⇨
A list of assignments will appear.
7.
Restart the terminal.
⇨
After restarting, the following notification will appear on the main terminal screen: "Confirm
the assignments." This notification will appear after any restart.
8.
"OK" - acknowledge the notification.
⇨
A list of recognized assignments will appear on the terminal screen.
9.
- Confirm the assignments.
Connecting sensors to the terminal
The terminal provides you with the possibility of connecting a sensor or the tractor's 7-pole signal
socket to port B. This allows you for example to use the working position signal in the TRACK-Leader
parallel guide.
The work position sensor sold by Müller-Elektronik is fitted with a round 3-pin plug. You will need an
adapter cable to connect it to the terminal.
Adaptor cable for the ME sensor Y work position sensor
Adapter cable
Item number
3-pin to 9-pin
31302499
Procedure
6.3
