6
Connecting and configuring external devices
Connecting the on-board integrated display/controller to the terminal
42
V5.20170221
31302713-02-EN
External lightbar
Plug for connection to the terminal
Plug for connecting a GPS receiver
Serial port
Activating an external LightBar
If you connected an external LightBar to the terminal, you must activate it.
To activate the external LightBar, you must first activate its driver.
You can order the external LightBar from Müller-Elektronik with the following item number: 30302490.
1.
- Open the Service application.
2.
Tap "Driver".
3.
Tap "LightBar".
⇨
The installed drivers will appear.
4.
Tap "Lightbar".
5.
- Confirm.
6.
Restart the terminal.
Connecting the on-board integrated display/controller to the
terminal
You can connect a range of on-board integrated display/controllers (non-ISO computers), which
communicate using the LH5000 protocol or the ASD interface, to the terminal.
An appropriate connector cable for each on-board integrated display/controller which can be
connected is available from Müller-Elektronik. Our sales team will be glad to advise you.
6.5.2
Procedure
6.6
