9.
Remove sealing ring (4) from injector (1) or
cylinder head.
10.
Remove O-rings (2) and damper ring (3)
from injector (1).
11.
Clean all mating and sealing surfaces.
12.
If carbon residue is present, clean sealing
face on cylinder head and protective sleeve
with milling cutter.
13.
Cover all connections and bores, or seal
with suitable plugs.
Installing injector
Note:
Do not remove plug for HP line until direct-
ly before assembly of the adapter.
1.
Prior to installation, remove plug.
2.
Coat injector with assembly paste at the
seat of the nozzle retaining nut.
Note:
A new sealing ring is included in the scope
of delivery of the injector.
3.
Insert new sealing ring (arrow).
4.
Fix new sealing ring (4) with grease on in-
jector (1).
Note:
A new sealing ring is included in the scope
of delivery of the injector.
5.
Fit new O-rings (2) and damper ring (3) on
injector (1) and coat with grease.
6.
Insert injector (1) together with hold-down
clamp into cylinder head, ensuring that the
high-pressure fuel line connection is
aligned correctly.
MS150110/00E 2013-10 | Task Description | 185
TIM-ID: 0000042325 - 001
