MTech MA-1000, Руководство по установке и эксплуатации

Страница: 92 / 107

91
2.2.14
Networking
Up to sixty three MA-1000 panels can be networked together to operate as a single networked
system. To achieve this each panel must be fitted with a network card.
When operating as a networked system all fire and fault information is displayed at every panel,
silencing and resetting of alarms can also be carried out from any panel on a networked system if
panels are suitably configured.
The PC Software enables the address, location text, device type and any comments to be
downloaded to the MA-1000 panels.
The software can download to all 63 networkable Panels.
The PC is connected to each Panel on the network in turn. All data for the Panel is downloaded.
For networked systems, panels are identified by panel number, P1, P2 etc.
NETWORK SETUP
1. From PC program set panel id number.
2. Set number of panels in the network (amount of panels)
3. Write Panel name.
Panel Name Set Panel
Number (The
panel ID
number) Set Number of Panels in the
Network ( The amount of
panels in the NETWORK)
To create the network project:
1. Select project button.
2. Choose ‘
New/Open file project’
from the list, as displayed below.
3. Select Management Panels button.
Enable Network
Reset This option enables the panel to be reset by the
network. If this option is not chosen the panel
will not be able to be reset by the network.
Enable Network
Silence This option enables the panel to be silenced by
the network. If this option is not chosen the
panel will not be able to be silenced by the
network.