MTech MA-1000, Руководство по установке и эксплуатации

Страница: 79 / 107

78
FIGURE 13 - Panel Outputs
SILENCE When the Silence key is pressed the Relay turn off.
FIRE Relays to turn on when a fire condition exists
TROUBLE Relays to turn on when in trouble mode
SUPERVISORY Relays to turn on when a supervisory condition exists.
Delay Delay time 0-120 sec to trigger Relay On when FIRE RELAY is selected.
Each step 10
–sec.
Timer Timer 0-120 sec to trigger Relay Off when FIRE RELAY is selected.
Each step 10
–sec.
Each Nac or Relay can be trigger by:
Global
– Any address or zone will trigger the output.
Double Knock
– Any 2 alarms from any address or zone will trigger the output.
Address
– Any point address from the list (allocated devices) up to 16, may be chosen.
Zone
– Any zone from the list (allocated devices) up to 16 may be chosen.
XAddress - Any devices from the allocated list up to 16, when all of them from the list enter
an Alarm condition the chosen Nac (Relay) will enable.
XZone - Any zone from the allocated list up to 16, when all of them from the list enter an Alarm
condition the chosen Nac (Relay) will enable.
MCP Override
– When any manual pull from the allocated list will trigger the chosen
Nac (Relay) will enable even in an X-cross situation.
Alarms in one zone - Up to 8 alarms together from the one chosen zone can trigger the Nac
(Relay).