MTD 13B721SD600, Руководство пользователя

Страница: 14 / 168

14
Operation
EN
Driving
Danger
Abrupt starting, sudden stopping, and driving at an
excessively high speed increases the risk of acci-
dents and may damage the device. Be particularly
careful when reversing. Never set/adjust the driver’s
seat while the unit is moving.
Caution! Damage to the device.
Never change the direction of travel without first
bringing the mower to a standstill.
■
Start the engine as indicated.
■
Release the parking brake: Push the brake pedal
down fully, push the lever to .
■
Slowly engage the accelerator pedal until you
have reached the speed you want.
Stopping the mower
■
Release the accelerator pedal.
■
Depress brake pedal until the mower stops.
Mowing
■
In normal mode / (see Operation, igni-
tion lock): Before reversing the machine, switch off
and raise the cutter deck.
■
In reverse mowing mode (see Op-
eration, ignition lock): Exercise extreme caution
when reverse mowing and do not activate unless
absolutely necessary.
■
Do not change direction when the mower is
coasting or driving.
■
Start the engine as indicated.
■
To ensure adequate power output, move the
throttle to .
■
Release the parking brake: Push the brake pedal
down fully, push the lever to .
■
Switch on the cutter deck:
-Switch on PTO .
■
Lower the cutter deck.
■
Select forward drive and speed with the acceler-
ator pedal (depress slowly). The device moves
forwards.
Emptying the grass catcher
If there are clippings left on the ground:
■
Stop the mower.
■
Actuate the parking brake.
■
Switch off the cutting mechanism.
Fig. 10a
■
Pull grass catcher upwards using the rear handle
and empty.
or
Fig. 10b
■
Stop the engine and wait until all moving parts
have come to a standstill.
■
Remove the grass catcher.
■
Empty out the contents.
■
Re-attach the grass catcher.
General
When adjusting the cutting height and travel speed,
ensure that the mower is not overloaded. To ensure
problem-free mowing, the cutting height and driving
speed must be adjusted according to the length,
type and moisture of the clippings. If blockages
occur, reduce the driving speed and increase the
cutting height.
Switching the device off
■
Stop the mower.
■
Step on the brake pedal and actuate the parking
brake.
■
Switch off and raise the cutter deck.
■
Move the throttle to the middle position.
■
After 20 seconds set ignition key to .
■
Remove the ignition key.
Note
Leave engine to cool down before placing
the mower in an enclosed space.
Pushing the device
Push the mower only when the engine is switched
OFF.
■
Release the gear (Fig.11): Pull out the lever, and
press it down
Return the gear lock lever before restarting the
engine.
Accessories (optional)
Risk of injury from the cutter
Wear safety gloves.
Fig. 6
Mowing with side discharge
Accessories: Discharge flap (c)
■
Move cutting height adjustment lever to “1” (cutter
deck down).
■
Remove discharge duct (b).
■
Attach deflector flap (c).
Mulching
Accessories: Mulch locking part (d)
■
Set the cutting height adjustment lever to "1"
(cutter deck bottom).
■
Remove discharge duct (b).
■
Fit mulch locking part (d).