2019 Premium Concept Elite Service Manual
Visit our website at: www.the-mspa.com
- 23 -
1. Take out the control box
；
2
、
Loosen four screws (ST4*60) from the bottom of the
cabinet
3
、
Loosen five screws (ST4*15) from the rear cover
of the cabinet; Loosen two screws (ST4*15) from the
base of the cabinet
4
、
Take out the internal cabinet and power board
；
5
、
Loosen three screws from the junction box; Loosen
4 black insertion pins
6
、
Loosed four screws on the junction box and cut off the
tie binding. Remove all leads on the circuit board
7. Loosen the fixed screws on circuit board; Take out the circuit board; Remove the tie and insertion between
Circuit board and data cable.
