2019 Premium Concept Elite Service Manual
Visit our website at: www.the-mspa.com
- 21 -
cabinet
3
、
Loosen five screws (ST4*15) from the rear cover
of the cabinet; Loosen two screws (ST4*15) from the
base of the cabinet
4
、
Take out the internal cabinet and power board
；
5
、
Loosen three screws from the fixed junction box;
disassemble 4 sets black pin-cable
；
6
、
Remove 4 screws and open the power board; cut off
the bindings and take out the 2 lead wires for transformer
6
、
Take out insertion from the filter pump support
；
8
、
Disconnect the insertion
；
9
、
Loosen 2 screws from transformer support; Then
loosen the 4 screws and take out the original
transformer. Assemble the new transformer into the
control box in reverse order.
10. Video available
4.6 How to replace filter pump (B9300929)
