2019 Premium Concept Elite Service Manual
Visit our website at: www.the-mspa.com
- 18 -
the smart control panel from the hole of pool liner.
7. Dissemble the plug and upper foam from the original
control box, then mount to the new replaced control box.
8
、
Assemble back new replaced control box into pool
liner in reverse order. (Video available)
4.3 Replace the bubble generator(B9301054)
1. Take out the control box
2. Loosen four screws (ST4*60) from the bottom of the
cabinet
3. Loosen five screws(ST4*15) from the rear cover
of the cabinet; Loosen two screws (ST4*15) from the
bottom of the cabinet
4. Take out the internal cabinet and power board
5. Loosen screws and disassemble the top cover
from the bubble generator
6. Remove the connection of leading wire and take out
the bubble generator