2019 Premium Concept Elite Service Manual
Visit our website at: www.the-mspa.com
- 7 -
2.4 Avoid Air Leakage from Spa Liner Split or Tiny Holes Due to Over-inflation (For
Premium/Elite series only)
2.5 Try to Repair the Tiny Holes or Split on Spa Liner Instead of Replacing a New Spa Liner
For pool liner air leakage caused by tiny holes or splits, it is suggested to first try to repair with glue and PVC
swatches provided in the repair kit. You can also order repair swatches from the spare part list.
With the repair material, most pin holes and splits can be repaired easily within 10 minutes.
Spa Tub and Air Bladder Repair
Use the enclosed repair patch to repair any puncture:
1. Clean and dry the area to be repaired thoroughly
2. Apply the glue to the PVC patch and quickly attach it onto the damaged surface
3. Smooth the surface to remove any air bubbles and allow it dry for 5-10 minutes
NOTE:
Glue is not included. Aquaseal & Stormsure glue is recommended for PVC inflatable items.
Glue physical and technical information:
2.6 Using Spa in the Cold Weather
It’s only possible to set up and leave the spa in the environment of an outside temperature of less than 4°C as long as
the spa has a constant water temperature guaranteed over 4°C.
Spa can only be used for temperature down to
maximum -10°C if it is properly set up to make sure no frozen water inside control box, pipes and spa pool.
Standard accessories(Except P-SH069 & E-BL069):
Ensure to ask customers to test the spa pool air pressure with manometer. Testing air pressure
is very critical during the installation process, because any air leakage, pool liner splits due to
over inflation are not covered by the ORPC/MSpa warranty. It is important to advise customers
to watch the MSpa DVD or follow the instruction manual carefully to check and test the air
pressure every single time before inflating or using the spa.
