2019 Premium Concept Elite Service Manual
Visit our website at: www.the-mspa.com
- 17 -
4.2 How to replace the control box (Premium/Elite)
1. Empty water in the spa pool and deflate the spa and
then screw off water inlet and outlet fittings with a
plastic wrench that was supplied in the spa package
;
2. Remove the knob switch (as shown in the video)
3、Remove the fixed ring of the water drainage
assembly;
4.1、Remove the fixed pressure plate of JET power
cord;(For Elite series only, video available: How to
disconnect Jet cable before taking out control box)
4.2、Disconnect two pairs of JET inserts from JET
cable insertion hole(For Elite series only)
4.3
Unscrew the PE air pipe
;
5、Unscrew the
check valve
’s connection plastic nut
; 6、
Take out the control box from the pool liner; pull out
1
2
1
JET cable
insertion
hole