60
Maintenance and Service
ALTAIR io360
US
(6) Install new batteries into the cavity oriented such that the battery
matches the orientation marked in the cavity.
(7) Assemble front and back housing. Install screws until resistance
starts.
(8) Finish tightening screws in the pattern as shown below.
Tighten screws to a torque of 10 in-lb +/- 1 in-lb (1.1 Nm +/- 0.1 Nm).
(9) Dispose of used batteries promptly.
Observe local disposal regulations.
Do not disassemble and do not dispose of in fire.
