29
Software Configuration Setup
ALTAIR io360
US
4.2.1 Detector Profile
If using the factory detector profile, skip this section.
Editing the detector profile is optional. See section 11 "Technical Data" for Detector profile specifications.
4.3
Connecting the Detector to the App
(1) Press the detector button to ensure that Bluetooth is communicating.
(2) Within the app, search for the detector.
(3) Within the app,select detector to be connected.
(4) When prompted, acknowledge connection on detector.
a) Press the button.
4.4
Adding a Detector to the Network
(1) Press the detector button to ensure that the Bluetooth is communicating.
The top LED will be blinking light purple for detectors not connected to a network..
Bluetooth will communicate for approximately 5 minutes after pressing the detector button.
The app will show all detectors communicating Bluetooth in range of the mobile device.
(2) From this app screen, select the detector(s) to be added to the network.
NOTE:
For optimal Bluetooth performance, do not add more than 4 detectors to a network at a time.
(3) Press “Save“.
The app updates the list of detector(s) not connected until all detectors have been added to the
network.
The yellow LED indicates the network addition is being processed.
Each detector will sequentially prompt you to accept the network configuration.
(4) Press the detector button to complete the network configuration.
It takes approximately 2 minutes for detector connection to be completed.
Once the connection is established, the network connectivity icon will appear on the detector's display
and the detector LED will blink green.
(5) Follow the app instructions to exit the workflow.
(6) Repeat these steps until all desired detectors are added to the network.