CT34002a_e.doc / Nov-15
Page 30 / 42
No. Command
Description
Assignment to
Keypad Input
7
Store to
EEPROM
Stores actual operational settings to the EEPROM, so
they remain available also after power down.
yes
yes
8
Scroll Display Selects the source of the digital display.
See chapter 7.3 Display for details.
yes
yes
9
Parameter
Disable
Disables the keypad for any parameter access. Only
commands assigned to the keypads will be accessible
no
yes
10 Jog / Trim
Forward
When command “Start” is released:
In stop state the inputs Jog / Trim forward and Jog /
Trim reverse move the cutting roll in one or the other
direction (Jog speed register settable).
After termination of a Jog command, the cutting roll
will be held again in its new position in closed-loop
control.
When command “Start” is set:
At automatic cutting cycles the inputs Jog / Trim
forward and Jog / Trim reverse shift the cutting
position forward or reverse (Trim speed register
settable), i. e. the unit temporarily cuts longer or
shorter pieces while one of the Trim inputs is set.
yes
yes
11 Jog / Trim
Backward
yes
yes
12 Clear Batch
Counter
Resets the internal batch counter to zero.
yes
yes
13 n.a.
no
no
14 Read
Thumbwheels
Reads and activates the cutting length setting from the
front thumbwheel switches (model CT641 only)
yes
yes
15 Clear Error
Resets error states and clears the corresponding error
messages (see also chapter 7.4 Error Messages)
yes
yes
16 n.a.
no
no
n.a. = not applicable
