CT34002a_e.doc / Nov-15
Page 23 / 42
F02
Range
Default
F02.024
Cutting Pulse Offset:
Offset register for virtual displacement of the physical
cutting pulse (generated from encoder index or by
proximity). Setting in +/- encoder increments. This
register makes superfluous a precise mechanical
adjustment of the location of the pulse (the virtual
cutting pulse must be located exactly in the peak
position of tool penetration).
-999999 …
+999999
0
6.2.3.
Definitions for the Master Encoder
F03
Range
Default
F03.026 Encoder properties
0 … 3
1
0= Differential Impulses A, /A, B, /B (2 x 90°) incl. inv.
1= Single-ended Impulses A, B (2 x 90°) without inv.
F03.027 Edge counting
0 … 2
0
0= Simple edge evaluation (x1)
1= Double edge evaluation (x2)
2= Full quadrature edge evaluation (x4)
F03.028 Counting direction
0 … 1
0
0= Up when A leads B
1= Down when A leads B
F03.029 Speed Display Factor
Multiplication factor to calculate the speed display value
from the master frequency (see chapter 7.3)
1 … 999999
1
F03.030 Speed Display Divider
Divider to calculate the speed display value from the master
frequency (see chapter 7.3)
1 … 999999
1
F03.031 Speed Display Dec.Point
Position of decimal point for the speed display value (see
chapter 7.3)
0 … 5
0
