Motorola RS507 Series, Руководство по продукции

Страница: 57 / 263

RS507 Update and Configuration 4 - 9
ATTR_SCAN_TRIG_WAKEUP_EN R/W 1 - Enabled
0 - Disabled 1 Scan trigger serves as
an Imager wake-up
source from low power.
ATTR_BLUETOOTH_AUTO_RECO
N R/W 0 –None
1 - Power on
2 - On when back in
range
3 - On when power is on
and back within range 2 Defines Bluetooth
reconnection scheme
(Permanently saved)
Important: If option 1
(On Power) or 3 (On
when power is on and
back within range) is set,
the pair should be
properly marked and
kept visible on the
Imager and mobile
computer to avoid user
selecting of an unpaired
set.
ATTR_PROXIMITY_CONTINUOUS
_EN R/W 1 - Enabled
0 - Disabled 0 Proximity continuous
mode (for scanning
packages off conveyer
belt).
ATTR_GOOD_SCANS_DELAY R/W Values 0 -150 (in 100
msec intervals)
0 – No delay
1 – 150 (100 – 15000
msec) 0 Delay between good
scans in proximity
continuous mode (msec).
ATTR_FORCE_PAIRING_SAVE R/W 0 – Disabled
1 – Enabled 1 Force BD_Address
saving when pairing fails
(Permanently saved).
ATTR_PAGING_ACTIVATE W 0 – Stop
1 – Start Start / stop Imager
paging
ATTR_BT_DISCONNECT W 0 - Disconnected Bluetooth disconnect
command from terminal
to Imager
ATTR_BT_UNPAIR W 0 - Unpaired Bluetooth un-pair
command from terminal
to Imager.
ATTR_FIRM_VERSION R N/A Imager Firmware
version.
ATTR_DEVICE_CLASS R N/A Imager system class
Attribute Access Values
Factory
Default
Description