Motorola RS507 Series, Руководство по продукции

Страница: 36 / 263

2 - 4 RS507 Hands-Free Imager Product Reference Guide
Wall Mount
To mount the Charger on a wall:
1.
Mark the screw location on the wall.
2.
Use four screws to mount the Charger to a wall. Be sure to use additional wall mounting hardware, as needed,
for safe mounting according to the wall type.
3.
Connect the power supply cable to the power connector on the back of the Charger (see Figure 2-3 ).
4.
Use the Power Supply Cable Duct, on the back of the Charger, to route the Power Supply Cable to the left or
right side of the Charger.
5.
Place the Power Supply Unit on a shelf or tabletop.
6.
Connect the AC plug of the AC Power Cord to a standard electrical outlet.
Figure 2-3
Wall Mounting of Charger
WARNING
! For safe mounting, it is essential to use wall anchors appropriate to the wall type (i.e. plaster,
drywall, concrete, etc.). Mount to wood studs whenever possible.
220 mm (8.6 inches)
38 mm (1.5 inches)
10 mm
(0.39 inches)
5 mm
(0.19 inches)