Motorola RS507 Series, Руководство по продукции

Страница: 55 / 263

RS507 Update and Configuration 4 - 7
Imager Attributes
Table 4-1 lists the Imager attributes that can be changed using the RSMSample application.
Table 4-1
lists of Imager Attributes
Attribute Access Values
Factory
Default
Description
ATTR_SCANLINE_WIDTH R/W 0 –
(Pick list disabled)
2 – Narrow
(Pick list enabled) 0 Width of laser scan line
or size of Imager's
effective Field of View
(Pick list)
ATTR_DISABLE_GOOD_DECODE
_LED_BEEP R/W 0- Enabled automatically
green LED and beep on
good decode.
1- Disabled Good decode feedback
on Imager
ATTR_MODEL_NUMBER R N/A N/A Model number
ATTR_SERIAL_NUMBER R N/A N/A Serial number
ATTR_DATE_OF_MANUFACTURE R N/A N/A Date of manufacture
ATTR_DATE_OF_SERVICE R N/A N/A Last date of repair by
Motorola
ATTR_BT_ADDR R N/A N/A Imager Bluetooth
address
ATTR_BT_AUTHENTICATION R/W 1 - Enabled
0 - Disabled 1 Enable Bluetooth
authentication
(Permanently saved)
ATTR_BT_ENCRYPTION R/W 1 - Enabled
0 - Disabled 1 Enable encryption over
Bluetooth (Permanently
saved)
ATTR_BT_PINCODE R/W Up to six characters “12345” Pin code when Bluetooth
Authentication is enabled
(Permanently saved)
ATTR_RECONNECT_ATTEMPTS R/W 6 = 30 sec, 7 = 35 sec, 8
= 40 sec, 9 = 45 sec, 10 =
50 sec, 11 = 55 sec, 12 =
60 sec 6 Reconnect attempt
duration when the
Imager is out of range
ATTR_BEEP_ON_RECON_ATTEM
PT R/W 1 - Enabled
0 - Disabled 0 When enabled, the
Imager emits 5 short high
beeps every 5 seconds
while the reconnection
attempt is in progress