Motorola RS507 Series, Руководство по продукции

Страница: 21 / 263

1 - 6 RS507 Hands-Free Imager Product Reference Guide
Getting Started - Cordless Configuration
Charge the Battery
Before using the Imager, charge the battery. The SAC5070 8-Bay Battery Charger supports both standard and
extended capacity batteries.
To charge the Imager battery, refer to the SAC5070 8-Bay Battery Charger Quick Reference Guide, p/n
72-115989-01 available at:
www.motorola.com/enterprisemobility/manuals and search for 'SAC5070'.
Install the Battery
1.
Align the battery on top of the Imager.
2.
Push the battery all the way into the Locking Slots of the Imager.
3.
Firmly press the battery into the Imager until a “click” is heard ensuring the Battery Release Latch is fully
engaged with the Imager.
Figure 1-5
Install the Battery
Remove the Battery
1.
Hold the Imager in one hand.
2.
Press the Battery Release Latch.
3.
Pull up the battery to release it from the Locking Slots of the Imager.
Wearing the Imager
1.
Slide the Imager onto the index and middle fingers with the Scan Trigger next to the thumb.
2.
Tighten the Finger Strap.
Locking Slots
Battery
Battery Release Latch
NOTE
When using the Imager for the first time, press and release the Scan Trigger to enable the manual
triggering mode (this operation disables the default auto triggering mode).