Motorola Netopia Embedded Software, Руководство пользователя

Страница: 300 / 340

10-26 Administrator’s Handbook
In this case, the mask, which does not appear in the table, must be set to 255.255.255.0. This way, all
packets with a source address of 200.233.14.x will be matched correctly, no matter what the final address byte
is.
Note:
The protocol attribute for this filter is 0 by default. This tells the filter to ignore the IP protocol or type of
IP packet.
Design guidelines
Careful thought must go into designing a new filter set. You should consider the following guidelines:
•
Be sure the filter set’s overall purpose is clear from the beginning. A vague purpose can lead to a faulty
set, and that can actually make your network
less secure.
•
Be sure each individual filter’s purpose is clear.
•
Determine how filter priority will affect the set’s actions. Test the set (on paper) by determining how the
filters would respond to a number of different hypothetical packets.
•
Consider the combined effect of the filters. If ever y filter in a set fails to match on a par ticular packet, the
packet is:
•
For warded if all the filters are configured to discard ( not for ward)
•
Discarded if all the filters are configured to for ward
•
Discarded if the set contains a combination of for ward and discard filters
Disadvantages of filters
Although using filter sets can greatly enhance network security, there are disadvantages:
•
Filters are complex. Combining them in filter sets introduces subtle interactions, increasing the likelihood
of implementation errors.
•
Enabling a large number of filters can have a negative impact on per formance. Processing of packets will
take longer if they have to go through many checkpoints.
•
Too much reliance on packet filters can cause too little reliance on other security methods. Filter sets are
not a substitute for password protection, effective safeguarding of passwords, caller ID, the “must match”
option in the answer profile, PAP or CHAP in connection profiles, callback, and general awareness of how
your network may be vulnerable.
An approach to using filters
The ultimate goal of network security is to prevent unauthorized access to the network without compromising
authorized access. Using filter sets is par t of reaching that goal.
Each filter set you design will be based on one of the following approaches:
•
That which is not expressly prohibited is permitted.
•
That which is not expressly permitted is prohibited.