manualshive.com logo in svg

Motorola Netopia Embedded Software, Руководство пользователя

Продукт "Motorola Netopia Embedded Software" - это встроенное программное обеспечение, которое позволяет управлять сетевым оборудованием. Здесь вы можете бесплатно скачать руководство по использованию manualshive.com. Это обязательный инструмент для эффективной работы с сетью.

Поделиться
Скачать
background image

3-56  Administrator’s Handbook

•

The following three fields allow you to log exceptions based on your filter policies:

•

Filter Violations,

•

Accepted Packets, and

•

Access Attempts

See 

“About Filters and Filter Sets” on page 10-20

 for more information.

You will need to install a Syslog client daemon program on your PC and configure it to repor t the WAN events 
you specified in the Logging Configuration screen.

The following screen shows a sample syslog dump of WAN events:

Log event dispositions

Note:

Syslog must be enabled to comply with Logging requirements mentioned in The Modular Firewall 

Cer tification Criteria - Baseline Module - version 4.1 (specified by ICSA Labs).
For more information, please go to the following URL:

http://www.icsalabs.com/icsa/docs/html/communities/firewalls/pdf/4.1/baseline.pdf

May  5 10:14:06 tsnext.netopia.com   Link 1 down: PPP PAP failure
May  5 10:14:06 tsnext.netopia.com >>Issued Speech Setup Request from our DN: 5108645534
May  5 10:14:06 tsnext.netopia.com   Requested Disc. from DN: 917143652500
May  5 10:14:06 tsnext.netopia.com   Received Clear Confirm for our DN: 5108645534
May  5 10:14:06 tsnext.netopia.com   Link 1 down: Manual disconnect
May  5 10:14:06 tsnext.netopia.com >>Issued Speech Setup Request from our DN: 5108645534
May  5 10:14:06 tsnext.netopia.com   Requested Disc. from DN: 917143652500
May  5 10:14:06 tsnext.netopia.com   Received Clear Confirm for our DN: 5108645534
May  5 10:14:06 tsnext.netopia.com   Link 1 down: No answer
May  5 10:14:06 tsnext.netopia.com --Device restarted-----------------------------------------
May  5 10:14:06 tsnext.netopia.com >>Received Speech Setup Ind. from DN: (not supplied)
May  5 10:14:06 tsnext.netopia.com   Requested Connect to our DN: 5108645534
May  5 10:14:06 tsnext.netopia.com   ASYNC: Modem carrier detected (more) Modem 
                                     reports: 26400 V34 
May  5 10:14:06 tsnext.netopia.com >>WAN: 56K Modem 1 activated at 115 Kbps
May  5 10:14:06 tsnext.netopia.com   Connect Confirmed to our DN: 5108645534
May  5 10:14:06 tsnext.netopia.com   PPP: Channel 1 up, Answer Profile name: Default Profile
May  5 10:14:06 tsnext.netopia.com   PPP: NCP up, session 1, Channel 1 Final (fallback) 
                                     negotiated auth: Local PAP , Remote NONE
May  5 10:14:06 tsnext.netopia.com   PPP: PAP  we accepted remote, Channel 1 Remote name: guest
May  5 10:14:06 tsnext.netopia.com   PPP: MP negotiated, session 1 Remote EDO: 06 03 0
                                     000C5700624 0
May  5 10:14:06 tsnext.netopia.com   PPP: CCP negotiated, session 1, type: Ascend
                                     LZS Local mode: 1, Remote mode: 1
May  5 10:14:06 tsnext.netopia.com   PPP: BACP negotiated, session 1 Local MN: FFFFFF
                                     FF, Remote MN: 00000001
May  5 10:14:06 tsnext.netopia.com   PPP: IPCP negotiated, session 1, rem: 
                                     192.168.10.100 local: 192.168.1.1
May  5 10:14:06 tsnext.netopia.com >>WAN: 56K Modem 1 deactivated
May  5 10:14:06 tsnext.netopia.com   Received Clear Ind. from DN: 5108645534, Cause: 0
May  5 10:14:06 tsnext.netopia.com   Issued Clear Response to DN: 5108645534
May  5 10:14:06 tsnext.netopia.com   Link 1 down: Remote clearing
May  5 10:14:06 tsnext.netopia.com   PPP: IPCP down, session 1
May  5 10:14:06 tsnext.netopia.com >>Received Speech Setup Ind. from DN: (not supplied)

Содержание Netopia Embedded Software





















































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Netopia Embedded Software

Sun Microsystems Ray 3 Plus Client Getting Started Manual preview
Ray 3 Plus Client
Бренд: Sun Microsystems Страницы: 6
Eaton APS6-400 Series Installation And Operation Manual preview
APS6-400 Series
Бренд: Eaton Страницы: 114
Sangamo CHOICE PR1 User Instructions preview
CHOICE PR1
Бренд: Sangamo Страницы: 2
Ubiquiti PowerBeam PBE-5AC-400-ISO Quick Start Manual preview
PowerBeam PBE-5AC-400-ISO
Бренд: Ubiquiti Страницы: 23
Comway 4G DTU Configuration Instructions preview
4G DTU
Бренд: Comway Страницы: 20
XAVI Technologies Corp. X7822r User Manual preview
X7822r
Бренд: XAVI Technologies Corp. Страницы: 63
ZyXEL Communications POE-12 Specifications preview
POE-12
Бренд: ZyXEL Communications Страницы: 2
Moxa Technologies IKS-6728 Series Hardware Installation Manual preview
IKS-6728 Series
Бренд: Moxa Technologies Страницы: 8
Axis M31-L SERIES Installation Manual preview
M31-L SERIES
Бренд: Axis Страницы: 30
StarTech.com PCI555WG Instruction Manual preview
PCI555WG
Бренд: StarTech.com Страницы: 16
ZyXEL Communications LTE7480-S905 Quick Start Manual preview
LTE7480-S905
Бренд: ZyXEL Communications Страницы: 4
National Instruments GPIB-120A User Manual preview
GPIB-120A
Бренд: National Instruments Страницы: 36
VAMISOUND Schoeps electret Building Instructions preview
Schoeps electret
Бренд: VAMISOUND Страницы: 15
NetApp StorageGRID Webscale SG5700 Series Install preview
StorageGRID Webscale SG5700 Series
Бренд: NetApp Страницы: 15
MikroTik hAP lite Quick Start preview
hAP lite
Бренд: MikroTik Страницы: 5
Zte ZXHN F600 User Manual preview
ZXHN F600
Бренд: Zte Страницы: 12
AVM Fritz!Box 7490 Installation And Operation Manual preview
Fritz!Box 7490
Бренд: AVM Страницы: 196
Texas Instruments SPRU938B User Manual preview
SPRU938B
Бренд: Texas Instruments Страницы: 48

Бренды по названию

Популярные бренды

Загрузить еще бренды