manualshive.com logo in svg

Motorola Netopia Embedded Software, Руководство пользователя

Продукт "Motorola Netopia Embedded Software" - это встроенное программное обеспечение, которое позволяет управлять сетевым оборудованием. Здесь вы можете бесплатно скачать руководство по использованию manualshive.com. Это обязательный инструмент для эффективной работы с сетью.

Поделиться
Скачать
background image

IP Setup   7-3

•

Select 

Primary Domain Name Server

 and enter the IP address for a domain name ser ver. The domain 

name ser ver matches the alphabetic addresses favored by people (for example, robin.hood.com) to the IP 
addresses actually used by IP gateways (for example, 163.7.8.202). 

•

If a secondar y DNS ser ver is available, select 

Secondary Domain Name Server

 and enter its IP address. 

The secondar y DNS ser ver is used by the Router when the primar y DNS ser ver is inaccessible. Entering a 
secondar y DNS is useful but not necessar y.

•

Select 

Domain Name

 and enter your network’s domain name (for example, motorola.com). Motorola 

strongly recommends that you enter a domain name.

•

Routing Information Protocol (RIP) is needed if there are IP routers on other segments of your Ethernet 
network that the Router needs to recognize. If this is the case select 

RIP Options

 and press Return. This 

will take you to the Ethernet LAN RIP options screen, where you can configure several parameters, 
including RIP v2 MD5 Authentication. See 

“RIP Options” on page 7-9

.

•

With Receive RIP set to v1, the Ethernet por t will accept routing information provided by RIP packets 
from other routers that use the same subnet mask. Set to v2, the router will accept routing informa-
tion provided by RIP packets from other routers that use different subnet masks. Set to Both, the 
router will accept information from either RIP v1 or v2 routers.

•

With Transmit RIP v1 selected, the router will generate RIP packets only to other RIP v1 routers. With 
Transmit RIP v2 (broadcast) selected, the router will generate RIP packets to all other hosts on the net-
work. With Transmit RIP v2 (multicast) selected, the router will generate RIP packets only to other rout-
ers capable of recognizing RIP v2 packets.

•

If you want to enable Multicast For warding, select 

Multicast Forwarding

 and from the pop-up menu, 

choose the type that you want to enable. See 

“Multicast Forwarding” on page 7-32

 for detailed 

configuration.

To configure multiple IGMP options, go to the 

IGMP Setup

 menu. See 

“IGMP (Internet Group Management 

Protocol)” on page 3-52

.

•

If you want to create Vir tual Redundant Routers, select 

VRRP Options

 and press Return. You will be taken 

to the Ethernet LAN VRRP Options screens. See 

“Virtual Router Redundancy (VRRP)” on page 7-34

.

•

Select 

Static Routes

 to manually configure IP routes. See the section 

“Static routes” on page 7-6

 below.

•

If you select 

IP Address Serving

 you will be taken to the IP Address Ser ving screen (see 

“IP Address 

Serving” on page 7-17

). Since no two hosts can use the same IP address at the same time, make sure 

that the addresses distributed by the Router and those that are manually configured are not the same. 
Each method of distribution must have its own exclusive range of addresses to draw from.

•

If you select 

Additional LANs

 you will be taken to the Additional LAN Configuration screen (see 

“Additional 

LANs” on page 7-38

). Here you can create up to six additional local area networks that can be associated 

with any IP routed inter face.

IP subnets

The IP Subnets screen allows you to configure up to eight Ethernet IP subnets on unlimited-user models, one 
“primar y” subnet and up to seven secondar y subnets, by entering IP address/subnet mask pairs:

Содержание Netopia Embedded Software





















































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Netopia Embedded Software

Eaton INDGW-X2 Manual preview
INDGW-X2
Бренд: Eaton Страницы: 10
Salusfin SF-930EU User'S Installation Manual preview
SF-930EU
Бренд: Salusfin Страницы: 6
Delta Electronics Ethernet Communication Module DVPEN01-SL Manual preview
Ethernet Communication Module DVPEN01-SL
Бренд: Delta Electronics Страницы: 54
MikroTik RouterBOARD Groove Quick Setup Manual And Warranty Information preview
RouterBOARD Groove
Бренд: MikroTik Страницы: 4
Lancom 1821n Wireless Manual preview
1821n Wireless
Бренд: Lancom Страницы: 102
C-Data CR200-1432R-B User Manual preview
CR200-1432R-B
Бренд: C-Data Страницы: 26
Sangamo CHOICE PR1 User Instructions preview
CHOICE PR1
Бренд: Sangamo Страницы: 2
H3C LSWM12H2Q User Manual preview
LSWM12H2Q
Бренд: H3C Страницы: 9
Rajant Corporation BreadCrumb CX1 User Manual preview
BreadCrumb CX1
Бренд: Rajant Corporation Страницы: 40
Cabletron Systems SmartSTACK ELS100-24TXM Installation And User Manual preview
SmartSTACK ELS100-24TXM
Бренд: Cabletron Systems Страницы: 117
Idis DR-6316PS-S Quick Manual preview
DR-6316PS-S
Бренд: Idis Страницы: 16
LevelOne FSW-0512 Specification Sheet preview
FSW-0512
Бренд: LevelOne Страницы: 2
IBM EM78P221/2N Specification preview
EM78P221/2N
Бренд: IBM Страницы: 70
UltrArmor UA3 Series User Manual preview
UA3 Series
Бренд: UltrArmor Страницы: 3
UfiSpace S9601-104BC Hardware Installation Manual preview
S9601-104BC
Бренд: UfiSpace Страницы: 34
ubiquoss U9016B Installation Manual preview
U9016B
Бренд: ubiquoss Страницы: 46
Zte Mobile Wi-Fi R209-Zr Quick Start Manual preview
Mobile Wi-Fi R209-Zr
Бренд: Zte Страницы: 2
Allied Telesis AT-24xx Owner'S Manual preview
AT-24xx
Бренд: Allied Telesis Страницы: 3

Бренды по названию

Популярные бренды

Загрузить еще бренды