manualshive.com logo in svg

Motorola Netopia Embedded Software, Руководство пользователя

Продукт "Motorola Netopia Embedded Software" - это встроенное программное обеспечение, которое позволяет управлять сетевым оборудованием. Здесь вы можете бесплатно скачать руководство по использованию manualshive.com. Это обязательный инструмент для эффективной работы с сетью.

Поделиться
Скачать
background image

7-32  Administrator’s Handbook

4.

Toggle or enter any IP parameters you require and return to the Add Connection Profile screen by pressing 
Escape. For more information on NAT, see 

“Multi-NAT,” beginning on page 4-1

.

The Local WAN IP Address is displayed for numbered or NAT profiles. The Local WAN IP Mask is displayed 
for numbered profiles. The Remote IP Address and Remote IP Mask are displayed for unnumbered profiles.

5.

Select 

ADD PROFILE NOW

 and press Return. Your new connection profile will be added.

If you want to view the connection profiles in your gateway, return to the WAN Configuration screen, and 
select 

Display/Change Connection Profile

. The list of connection profiles is displayed in a scrolling pop-up 

screen.

Multicast Forwarding

Multicasting is a method for transmitting large amounts of information to many, but not all, computers over an 
Internet. One common use is to distribute real time audio and video to the set of computers which have joined 
a distributed conference.

Multicasting is similar to radio or TV broadcasts in the sense that only those who have tuned in to a par ticular 
frequency receive the information. You see and hear the channel you are interested in, but not the others.

Since a router should not be used as a passive for warding device, Motorola Netopia

®

 Routers use a protocol for 

for warding multicasting. This protocol is Internet Group Management Protocol (IGMP). Motorola Netopia

®

 

Routers can use either IGMP Version 1, Version 2, or Version 3, however, Multicast For warding will only work if 
your ser vice provider suppor ts it. Check with your ser vice provider. IGMP for warding is enabled per IP Profile 
and WAN Connection Profile.

You configure Multicast For warding in two Telnet menu screens:

•

First, you enable Multicast For warding in the 

IP Setup

 screen in the 

System Configuration

 menu,

                                WAN Configuration
         +-Profile Name---------------------IP Address------+
         +--------------------------------------------------+
         | Easy Setup Profile               127.0.0.2       |
         | Profile 1                        0.0.0.0         |
         |                                                  |
         |                                                  |
         |                                                  |
         |                                                  |
         |                                                  |
         |                                                  |
         |                                                  |
         |                                                  |
         |                                                  |
         |                                                  |on:     Yes
         |                                                  |
         |                                                  |
         |                                                  |
         |                                                  |
         +--------------------------------------------------+

Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.

Содержание Netopia Embedded Software





















































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Netopia Embedded Software

Baracoda All in One Printer Communication Protocol Manual preview
All in One Printer
Бренд: Baracoda Страницы: 42
Barco MatrixPRO-II DVI 16x16 User Manual preview
MatrixPRO-II DVI 16x16
Бренд: Barco Страницы: 43
Barco matrixpro-II Information Manual preview
matrixpro-II
Бренд: Barco Страницы: 5
QNO 2WAN 3LAN User Manual preview
2WAN 3LAN
Бренд: QNO Страницы: 106
Face XR18 User Manual preview
XR18
Бренд: Face Страницы: 8
Belkin F5D9001 Series Manual preview
F5D9001 Series
Бренд: Belkin Страницы: 72
Helmholz REX 200 Quick Start Manual preview
REX 200
Бренд: Helmholz Страницы: 28
Allnet ALL1682504 Quick Installation preview
ALL1682504
Бренд: Allnet Страницы: 12
Telebyte 458-LM-E2-36 Quick Start Manual preview
458-LM-E2-36
Бренд: Telebyte Страницы: 19
LGC wireless InterReach Fusion SingleStar Installation And Operation Manual preview
InterReach Fusion SingleStar
Бренд: LGC wireless Страницы: 154
Supermicro AOC-MGP-i2 User Manual preview
AOC-MGP-i2
Бренд: Supermicro Страницы: 27
Freund FE-W826-T2 Setup Manual preview
FE-W826-T2
Бренд: Freund Страницы: 6
B&B Electronics EIP308 Product Information preview
EIP308
Бренд: B&B Electronics Страницы: 2
Patton electronics FORESIGHT 6300 User Manual preview
FORESIGHT 6300
Бренд: Patton electronics Страницы: 145
Cabletron Systems SmartSTACK ELS100-24TXM Installation And User Manual preview
SmartSTACK ELS100-24TXM
Бренд: Cabletron Systems Страницы: 117
National Instruments PXI Terminal Block NI TB-2709 Installation Manual preview
PXI Terminal Block NI TB-2709
Бренд: National Instruments Страницы: 12
H3C SecPath F1070 Manual preview
SecPath F1070
Бренд: H3C Страницы: 68
RR-Concepts StationMaster Manual preview
StationMaster
Бренд: RR-Concepts Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды