Motorola MOTOWI 4 PTP 600 Series, Руководство пользователя системы

Страница: 91 / 278

89
The following section details all the attributes displayed on the status page:
Link Name:
The link name is allocated by the system administrator and is used to identify the
equipment on the network. The link name attribute is limited to a maximum size of 63 ASCII
characters.
Link Location:
The link location is allocated by the system administrator and can be used as
a generic scratch pad to describe the location of the equipment or any other equipment
related notes. The link location attribute is limited to a maximum size of 63 ASCII characters.
Software Version:
The attribute describes the version of software installed on the
equipment. The format of the attributes is
FFSSS
-XX-
YY
where
FF
is the frequency variant
(2.5, 5.4 or 5.8GHz),
SSS
is the System Release,
XX
is the major release version and
YY
is
the minor release version.
Hardware Version:
The hardware version attribute contains all the combined hardware
version information. The attribute is formatted as D
XX
-R
YY
-
Z
where D
XX
contain the version
of the digital card, R
YY
contains the version of the RF (radio frequency) card and
Z
describes
the antenna type which can be I (integrated) or C (connectorized).
Region Code:
The region code is used by the system to constrain the wireless to operate
within regulatory regime of the particular country. The region code is encoded in the product
license key. If the operator wishes to change region code, a new license key must be
obtained from Motorola or the local point-to-point distributor / system integrator.
Elapsed Time Indicator:
The elapsed time indicator attribute presents the total time in years,
days, hours, minutes and seconds since the last system restart. The system can restart for
several reasons, e.g. commanded reboot from the system reboot web page, or a power cycle
of the equipment.
Ethernet Link Status:
Current status of the Ethernet link. A state of ‘Up’ with a green
background indicates that an Ethernet link is established. A state of ‘Down’ with a red
background indicates that the Ethernet link is not established.