manualshive.com logo in svg

Motorola EX-3524, Справочное руководство CLI

Motorola EX-3524 - коммутатор Ethernet, обеспечивающий высокую производительность и надежность. Для установки и настройки устройства загрузите бесплатное руководство по эксплуатации на manualshive.com. Руководство по установке поможет вам быстро начать использовать все возможности этого продукта.

Поделиться
Скачать
background image

–  581  –

B

License Information

This product includes copyrighted third-party software subject to the terms of the GNU General Public 
License (GPL), GNU Lesser General Public License (LGPL), or other related free software licenses. 
The GPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the 
copyrights of one or more authors. For details, refer to the section "The GNU General Public License" 
below, or refer to the applicable license as included in the source-code archive.

The GNU General Public License

GNU GENERAL PUBLIC LICENSE
Version 2, June 1991

Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it 
is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By 
contrast, the GNU General Public License is intended to guarantee your freedom to share and 
change free software--to make sure the software is free for all its users. This General Public License 
applies to most of the Free Software Foundation's software and to any other program whose authors 
commit to using it. (Some other Free Software Foundation software is covered by the GNU Library 
General Public License instead.) You can apply it to your programs, too.

When we speak of free software, we are referring to freedom, not price. Our General Public Licenses 
are designed to make sure that you have the freedom to distribute copies of free software (and 
charge for this service if you wish), that you receive source code or can get it if you want it, that you 
can change the software or use pieces of it in new free programs; and that you know you can do 
these things.

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to 
ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you 
distribute copies of the software, or if you modify it.

For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the 
recipients all the rights that you have. You must make sure that they, too, receive or can get the 
source code. And you must show them these terms so they know their rights.

We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which 
gives you legal permission to copy, distribute and/or modify the software.

Also, for each author's protection and ours, we want to make certain that everyone understands that 
there is no warranty for this free software. If the software is modified by someone else and passed on, 
we want its recipients to know that what they have is not the original, so that any problems introduced 
by others will not reflect on the original authors' reputations.

Finally, any free program is threatened constantly by software patents. We wish to avoid the danger 
that redistributors of a free program will individually obtain patent licenses, in effect making the 
program proprietary. To prevent this, we have made it clear that any patent must be licensed for 
everyone's free use or not licensed at all.

The precise terms and conditions for copying, distribution and modification follow.

Содержание EX-3524










































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для EX-3524

Vanguard 342 Quick Reference Manual preview
342
Бренд: Vanguard Страницы: 4
LaCie 5BIG NAS PRO Quick Install Manual preview
5BIG NAS PRO
Бренд: LaCie Страницы: 22
Far Tools MR 40PB Original Manual Translation preview
MR 40PB
Бренд: Far Tools Страницы: 24
3Com 3C589D User Manual preview
3C589D
Бренд: 3Com Страницы: 50
B-G Instruments DataPlot CB1224 Manual preview
DataPlot CB1224
Бренд: B-G Instruments Страницы: 4
V-Count Ultima Go Quick Installation Manual preview
Ultima Go
Бренд: V-Count Страницы: 2
Riverbed SteelCentral NetExpress 470 Upgrade And Maintenance Manual preview
SteelCentral NetExpress 470
Бренд: Riverbed Страницы: 140
N-Tron 104TX Specification Sheet preview
104TX
Бренд: N-Tron Страницы: 2
3Com 3CRWE737A - 11Mbps Airconnect Wireless Lan PC Card... Datasheet preview
3CRWE737A - 11Mbps Airconnect Wireless Lan PC Card...
Бренд: 3Com Страницы: 6
Divio NRM 311 User Manual preview
NRM 311
Бренд: Divio Страницы: 78
Billion myguard 6700G Specifications preview
myguard 6700G
Бренд: Billion Страницы: 2
Cisco ASR 9001 Hardware Installation Manual preview
ASR 9001
Бренд: Cisco Страницы: 160
Huawei CR52-LPUF-20 Specifications preview
CR52-LPUF-20
Бренд: Huawei Страницы: 4
Huawei CR52-RPR/STM64-XFP Specifications preview
CR52-RPR/STM64-XFP
Бренд: Huawei Страницы: 2
Huawei CR52-POS/STM64 Specifications preview
CR52-POS/STM64
Бренд: Huawei Страницы: 2
Huawei CR52-SFUD Specifications preview
CR52-SFUD
Бренд: Huawei Страницы: 1
Huawei CR52K-2xPOS/STM64 Specifications preview
CR52K-2xPOS/STM64
Бренд: Huawei Страницы: 2
Asus RT-AX95U Quick Start Manual preview
RT-AX95U
Бренд: Asus Страницы: 11

Бренды по названию

Популярные бренды

Загрузить еще бренды