Motorola EX-3524, Справочное руководство CLI

Страница: 576 / 617

Chapter 26
| IP Routing Commands
Global Routing Configuration
– 576 –
show ip route
database
This command displays entries in the Routing Information Base (RIB).
Command Mode
Privileged Exec
Command Usage
The RIB contains all available routes learned through dynamic routing protocols,
directly attached networks, and any additionally configured routes such as static
routes. The RIB contains the set of all available routes from which optimal entries
are selected for use by the Forwarding Information Base (see Command Usage
under the
show ip route command).
Example
Console#show ip route database
Codes: C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
> - selected route, * - FIB route, p - stale info
C *> 127.0.0.0/8 is directly connected, lo0
C *> 192.168.1.0/24 is directly connected, VLAN1
Console#
show ip route
summary
This command displays summary information for the routing table.
Command Mode
Privileged Exec
Example
In the following example, the numeric identifier following the named routing table
(that is, the Forwarding Information Base) is the FIB ID.
Console#show ip route summary
IP routing table name is Default-IP-Routing-Table(0)
IP routing table maximum-paths is 4
Connected 2
Total 2
FIB 0
Console#