Motorola EX-3524, Справочное руководство CLI

Страница: 38 / 617

Chapter 1
| Initial Switch Configuration
Connecting to the Switch
– 38 –
4.
Type “username motorola password 0 password ,” for the Privileged Exec level,
where password is your new password. Press <Enter>.
Username: motorola
Password:
CLI session with the EX-3524* is opened.
To end the CLI session, enter [Exit].
Console#configure
Console(config)#username guest password 0 [password]
Console(config)#username motorola password 0 [password]
Console(config)#
* This manual covers both the EX-3524 and EX-3548 Gigabit Ethernet PoE/PoE+
switches. Other than the difference in the number of ports, there are no other
significant differences. Therefore nearly all of the screen display examples are
based on the EX-3524.
Remote Connections
Prior to accessing the switch’s onboard agent via a network connection, you must
first configure switch’s network interface with a valid IPv4 or IPv6 address.
The default network interface is VLAN 1 which includes ports 1-28/52. When
configuring the network interface, the IP address, subnet mask, and default
gateway may all be set using a console connection, or DHCP protocol as described
in the following sections.
An IPv4 address for this switch is obtained via DHCP by default. To manually
configure this address or enable dynamic address assignment via DHCP, see
“Setting an IP Address” on page 39 .
After configuring the switch’s IP parameters, you can access the onboard
configuration program from anywhere within the attached network. The onboard
configuration program can be accessed using Telnet or SSH from any computer
attached to the network. The switch can also be managed by any computer using a
web browser (Internet Explorer 6, Mozilla Firefox 4, or Google Chrome 29, or more
recent versions), or from a network computer using SNMP network management
software.
Note: This switch supports four Telnet sessions or SSH sessions.
The onboard program only provides access to basic configuration functions. To
access the full range of SNMP management functions, you must use SNMP-based
network management software.