manualshive.com logo in svg

Motorola EX-3524, Справочное руководство CLI

Motorola EX-3524 - коммутатор Ethernet, обеспечивающий высокую производительность и надежность. Для установки и настройки устройства загрузите бесплатное руководство по эксплуатации на manualshive.com. Руководство по установке поможет вам быстро начать использовать все возможности этого продукта.

Поделиться
Скачать
background image

Appendix B

  |  License Information

ISC License

–  591  –

---- Part 7: Fabasoft R&D Software GmbH & Co KG copyright notice (BSD) -----

Copyright (c) Fabasoft R&D Software GmbH & Co KG, 2003
[email protected]
Author: Bernhard Penz 

Redistribution and use in source and binary forms, with or without modification, are permitted 
provided that the following conditions are met:

*  Redistributions of source code must retain the above copyright notice,    this list of conditions and 

the following disclaimer.

*  Redistributions in binary form must reproduce the above copyright    notice, this list of conditions 

and the following disclaimer in the    documentation and/or other materials provided with the 
distribution.

*  The name of Fabasoft R&D Software GmbH & Co KG or any of its subsidiaries,  brand or product 

names may not be used to endorse or promote products derived from this software without specific 
prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER ``AS IS'' AND ANY EXPRESS 
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN 
NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT, INDIRECT, 
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE 
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

---- Part 8: Apple Inc. copyright notice (BSD) -----

Copyright (c) 2007 Apple Inc. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted 
provided that the following conditions are met:

1.

Redistributions of source code must retain the above copyright notice, this list of conditions and 
the following disclaimer.

2.

Redistributions in binary form must reproduce the above copyright notice, this list of conditions 
and the following  disclaimer in the documentation and/or other materials provided with the 
distribution.

3.

 Neither the name of Apple Inc. ("Apple") nor the names of its contributors may be used to 
endorse or promote products derived  from this software without specific prior written 
permission.

THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY 
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY 
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
LOSS OF  USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Содержание EX-3524










































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для EX-3524

Linksys WRT54G3G-AT Product Data preview
WRT54G3G-AT
Бренд: Linksys Страницы: 2
F5 WANJet 500 Quick Start Card preview
WANJet 500
Бренд: F5 Страницы: 2
F5 ARX-500 Hardware Reference Manual preview
ARX-500
Бренд: F5 Страницы: 90
F5 ARX-4000 Parts Replacement Manual preview
ARX-4000
Бренд: F5 Страницы: 47
IBM J02M Quick Start Manual preview
J02M
Бренд: IBM Страницы: 32
Jetter JetWeb JX2-PR0FI1 Operator'S Manual preview
JetWeb JX2-PR0FI1
Бренд: Jetter Страницы: 67
Navini Networks RIPWAVE 40-00460-00R User Manual preview
RIPWAVE 40-00460-00R
Бренд: Navini Networks Страницы: 35
Multitech MultiConnect SE MTS2EA Specification Sheet preview
MultiConnect SE MTS2EA
Бренд: Multitech Страницы: 2
Paradyne 7510 DSU Start-Up Instructions preview
7510 DSU
Бренд: Paradyne Страницы: 10
B&B Electronics RS-232/422/485 Serial Card CE 3PXCC4A User Manual preview
RS-232/422/485 Serial Card CE 3PXCC4A
Бренд: B&B Electronics Страницы: 47
IBM 8677 - BladeCenter Rack-mountable - Power Supply Planning And Installation Manual preview
8677 - BladeCenter Rack-mountable - Power Supply
Бренд: IBM Страницы: 126
UfiSpace S9600-28DX Hardware Installation Manual preview
S9600-28DX
Бренд: UfiSpace Страницы: 34
NKE BOX Wi-Fi User Manual And Installation Manual preview
BOX Wi-Fi
Бренд: NKE Страницы: 15
Ubiquiti EdgeRouter PoE ERPoe-5 Quick Start Manual preview
EdgeRouter PoE ERPoe-5
Бренд: Ubiquiti Страницы: 13
Cabletron Systems MMAC-Plus 9G536-04 User Manual preview
MMAC-Plus 9G536-04
Бренд: Cabletron Systems Страницы: 42
8e6 Technologies HL-002-006 Quick Start Manual preview
HL-002-006
Бренд: 8e6 Technologies Страницы: 94
IBM Nways 2216 Service And Maintenance Manual preview
Nways 2216
Бренд: IBM Страницы: 168
Clas Ohlson AE222X1 Quick Start Manual preview
AE222X1
Бренд: Clas Ohlson Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды