Motorola EX-3524, Справочное руководство CLI

Страница: 335 / 617

Chapter 13
| Port Mirroring Commands
Local Port Mirroring Commands
– 335 –
◆
The destination port cannot be a trunk or trunk member port.
◆
RSPAN and 802.1X are mutual exclusive functions. When 802.1X is enabled
globally, RSPAN uplink ports cannot be configured, even though RSPAN source
ports and destination ports can still be configured. When RSPAN uplink ports
are enabled on the switch, 802.1X cannot be enabled globally. Also, RSPAN
uplink ports cannot be configured to use IEEE802.1X Port Authentication, but
RSPAN source ports and destination ports can be configured to use it.
Example
The following example configures the switch to mirror all packets from port 6 to 11:
Console(config)#interface ethernet 1/11
Console(config-if)#port monitor ethernet 1/6 both
Console(config-if)#
show port monitor
This command displays mirror information.
Syntax
show port monitor [ interface | vlan vlan-id | mac-address mac-address ]
interface - ethernet unit / port (source port)
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
vlan-id - VLAN ID (Range: 1-4093)
mac-address - MAC address in the form of xx-xx-xx-xx-xx-xx or
xxxxxxxxxxxx.
Default Setting
Shows all sessions.
Command Mode
Privileged Exec
Command Usage
This command displays the currently configured source port, destination port, and
mirror mode (i.e., RX, TX, RX/TX).
Example
The following shows mirroring configured from port 6 to port 11:
Console(config)#interface ethernet 1/11
Console(config-if)#port monitor ethernet 1/6
Console(config-if)#end