Motorola AP-7131 Series, Справочное руководство

Страница: 778 / 954

13 - 40 WiNG 5.5 Access Point System Reference Guide
The Multicast Path tab displays the following:
The Neighbors tab displays the following:
Bound Indicates whether the root is bound or unbound .
Metric Displays the computed path metric between the neighbor and their root mesh point.
Interface Bias This field lists any bias applied because of preferred root Interface Index.
Neighbor Bias This field lists any bias applied because of preferred root next-hop Neighbor IFID.
Root Bias This field lists any bias applied because of preferred root MPID.
Mesh Point Name Displays the name of each configured mesh point in the RF Domain.
Subscriber Name Lists the subscriber name is used to distinguish between other mesh point neighbors both
on the same device and on other devices.
Subscriber MPID Lists the subscriber ID to distinguish between other mesh point neighbors both on the
same device and on other devices.
Group Address Displays the MAC address used for the group in the mesh point.
Path Timeout The timeout interval in seconds. The interpretation this value will vary depending on the
value of the state. If the state is
Init or In Progress , the timeout duration has no
significance. If the state is Enabled , the timeout duration indicates the amount of time left
before the security validity check is initiated. If the state is Failed , the timeout duration is
the amount of time after which the system will retry.
Mesh Point Name Displays the name of each configured mesh point in the RF Domain.
Destination Addr The destination is the endpoint of mesh path. It may be a MAC address or a mesh point ID.
Neighbor MP ID The MAC Address that the device uses to define the mesh point in the device that the
neighbor is a part of. It is used to distinguish the device that is the neighbor.
Neighbor IFID The MAC Address used by the interface on the neighbor device to communicate with this
device. This may define a particular radio or Ethernet port that communicates with this
device over the mesh.
Root MP ID The mesh point ID of the neighbor's root mesh point.
Is Root A root mesh point is defined as a mesh point that is connected to the WAN and provides
a wired backhaul to the network.
Yes if the mesh point that is the neighbor is a root mesh
point or No if the mesh point that is the neighbor is not a root mesh point.
Mobility Displays whether the mesh point is a mobile or static node. Displays True when the device
is mobile and False when the device is not mobile.
Radio Interface This indicates the interface that is used by the device to communicate with this neighbor.
The values are
2.4 and 5.0 , indicating the frequency of the radio that is used to
communicate with the neighbor.