manualshive.com logo in svg

Motorola AP-7131 Series, Справочное руководство

Motorola AP-7131 Series - это надежное и мощное сетевое оборудование для вашего бизнеса. Установочное руководство и другие руководства пользователя можно скачать бесплатно с {сайт}, чтобы быстро настроить и использовать ваше устройство. Улучшите свою сеть с Motorola AP-7131 Series уже сегодня!

Поделиться
Скачать
background image

Network configuration 7 - 19

14. Select the 

Settings

 tab.

Host

Specify the IP address or hostname of the RADIUS authentication server.

Port

Define or edit the port on which the RADIUS server listens to traffic within the access 
point managed network. The port range is 1 - 65,535. The default port is 1813.

Server Type

Select the type of AAA server as either 

Host

, 

onboard-self

 or onboard

-controller

.

Secret

Specify the secret (password) used for authentication on the selected RADIUS server. By 
default the secret is displayed as asterisks.

Request Proxy Mode

Select the method of proxy that browsers communicate with the RADIUS authentication 
server. The mode could either be 

None

, 

Through Wireless Controller

 or 

Through RF 

Domain Manager

.

Proxy Mint Host

Specify a 64 character maximum hostname or the Mint ID of the Mint device used for 
proxying requests.

Request Attempts

Displays the number of attempts a client can retransmit a missed frame to the RADIUS 
server before it times out of the authentication session. The available range is from 1 - 10. 
The default is 3.

Request Timeout

Specify the time for the access point’s re-transmission of request packets. The default is 
5 seconds. If this time is exceeded, the authentication session is terminated.

Retry Timeout Factor

Specify the interval, in seconds, between two successive re-transmission attempts of 
request packets. Specify a value from 50 - 200 seconds. The default is 100 seconds.

DSCP

Displays the DSCP value as a 6-bit parameter in the header of every IP packet used for 
packet classification. The valid range is from 0 - 63 with a default value of 34.

NAI Routing Enable

Displays NAI routing status. AAA servers identify clients using the NAI. The NAI is a 
character string in the format of an E-mail address as either user or user@ but it need not 
be a valid E-mail address or a fully qualified domain name. NAI can be used either in a 
specific or generic form. The specific form, which must contain the user portion and may 
contain the @ portion, identifies a single user. Each user still needs a unique security 
association, but these associations can be stored on a AAA server. The original purpose 
of NAI was to support roaming between dialup ISPs. Using NAI, each ISP need not have 
all the accounts for all of its roaming partners in a single RADIUS database. RADIUS 
servers can proxy requests to remote servers for each.

Realm

Enter the realm name. The name cannot exceed 64 characters. When the access point’s 
RADIUS server receives a request for a user name, the server references a table of user 
names. If the user name is known, the server proxies the request to the RADIUS server.

Realm Type

Specify the realm as either 

Prefix

 or 

Suffix

.

Strip Realm

Select this option to remove information from the packet when NAI routing is enabled.

Содержание AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AP-7131 Series

Accusys ACS-76500 Owner'S Manual preview
ACS-76500
Бренд: Accusys Страницы: 34
Intel Optane M Series Installation And User Manual preview
Optane M Series
Бренд: Intel Страницы: 59
DAD DPX2060 User Manual preview
DPX2060
Бренд: DAD Страницы: 32
Quectel Wi-Fi-M.2 EVB User Manual preview
Wi-Fi-M.2 EVB
Бренд: Quectel Страницы: 23
Bridgeworks a204 Hardware Manual preview
a204
Бренд: Bridgeworks Страницы: 18
Mylex eXtremeRAID 1100 Installation Manual preview
eXtremeRAID 1100
Бренд: Mylex Страницы: 74
Klark Teknik DN9650 Operator'S Manual preview
DN9650
Бренд: Klark Teknik Страницы: 50
ADC PG-FlexPlus AMU-912 Manual preview
PG-FlexPlus AMU-912
Бренд: ADC Страницы: 130
Fieldbus Specialists AT-FBUS Getting Started preview
AT-FBUS
Бренд: Fieldbus Specialists Страницы: 39
IOtech ADAC/5500MF Installation Manual preview
ADAC/5500MF
Бренд: IOtech Страницы: 16
National Instruments FieldPoint cFP-RTD-122 Operating Instructions Manual preview
FieldPoint cFP-RTD-122
Бренд: National Instruments Страницы: 15
National Instruments PCI-6110E/6111E User Manual preview
PCI-6110E/6111E
Бренд: National Instruments Страницы: 113
ebm-papst D3G146-LT13-30 Operating Instructions Manual preview
D3G146-LT13-30
Бренд: ebm-papst Страницы: 11
YASKAWA PG-Z2 Instructions Manual preview
PG-Z2
Бренд: YASKAWA Страницы: 15
DAD DXZ48 User Manual preview
DXZ48
Бренд: DAD Страницы: 16
Addonics Technologies ADSA2 Installation Manual preview
ADSA2
Бренд: Addonics Technologies Страницы: 1
Selta Alyseo 106 User Manual preview
Alyseo 106
Бренд: Selta Страницы: 83
Medel RONDO 3 Quick Manual preview
RONDO 3
Бренд: Medel Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды