manualshive.com logo in svg

Motorola AP-7131 Series, Справочное руководство

Motorola AP-7131 Series - это надежное и мощное сетевое оборудование для вашего бизнеса. Установочное руководство и другие руководства пользователя можно скачать бесплатно с {сайт}, чтобы быстро настроить и использовать ваше устройство. Улучшите свою сеть с Motorola AP-7131 Series уже сегодня!

Поделиться
Скачать
background image

6 - 28 WiNG 5.5 Access Point System Reference Guide 

Network Service Alias

The service alias is a set of configurations consisting of protocol and port mappings. Both 
source and destination ports are configurable. Set an alphanumeric service alias 
(beginning with a $ character and containing one special character) and include the 
protocol as relevant. Selecting either

 tcp 

or 

udp

 displays an additional set of specific TCP/

UDP source and destinations port options.

Source Port

If using either 

tcp

 or 

udp

 as the protocol, define whether the source port for incoming IP 

ACL rule application is 

any

, 

equals

 or an administrator defined 

range

. If not using tcp or 

udp, this setting displays as N/A. This is the data local origination virtual port designated 
by the administrator. Selecting equals invokes a spinner control for setting a single 
numeric port. Selecting range displays spinner controls for 

Low

 and 

High

 numeric range 

settings. A source port cannot be a destination port.

Destination Port

If using either 

tcp

 or 

udp

 as the protocol, define whether the destination port for incoming 

IP ACL rule application is 

any

, 

equals

 or an administrator defined 

range

. If not using tcp or 

udp, this setting displays as N/A. This is the data local origination virtual port designated 
by the administrator. Selecting equals invokes a spinner control for setting a single 
numeric port. Selecting range displays spinner controls for

 Low

 and 

High

 numeric range 

settings.

ICMP Type

Selecting 

ICMP

 as the protocol for the IP rule displays an additional set of ICMP specific 

options for ICMP type and code. The 

Internet Control Message Protocol

 (ICMP) uses 

messages identified by numeric 

type

. ICMP messages are used for packet flow control or 

generated in IP error responses. ICMP errors are directed to the source IP address of the 
originating packet. Assign an ICMP type from 1-10.

ICMP Code

Selecting 

ICMP

 as the protocol for the IP rule displays an additional set of ICMP specific 

options for ICMP type and code. Many ICMP types have a corresponding 

code

, helpful for 

troubleshooting network issues (0 - Net Unreachable, 1- Host Unreachable, 2 - Protocol 
Unreachable etc.).

Start VLAN

Select a 

Start VLAN

 icon within a table row to set (apply) a start VLAN range for this IP 

ACL filter. Start VLAN represents the virtual LAN beginning numeric identifier arriving 
packets must adhere to in order to have the IP ACL rules apply.

End VLAN

Select an 

End VLAN

 icon within a table row to set (apply) an end VLAN range for this IP 

ACL filter. End VLAN represents the virtual LAN end numeric identifier arriving packets 
must adhere to in order to have the IP ACL rules apply.

Protocol

Select the protocol to filter for this ACL. Use the drop down to select from a list of 
predefined protocol or use the spinner control to set a particular protocol number.

Mark

Select this option to mark certain fields inside a packet before allowing them. Mark is only 
applicable for 

Allow

 rules. Mark sets the rule’s 802.1p or 

dscp

 level (from 0 - 7)

Log

Select this option to create a log entry that a firewall rule has allowed a packet to be 
either denied or allowed.

Enabled

Select this option to enable or disable this particular IP Firewall rule in this rule set. 

Description

Lists the administrator assigned description applied to the IP ACL rule. Select a 
description within the table to modify its character string as filtering changes warrant. 
Select the icon within the Description table header to launch a 

Select Columns

 screen 

used to add or remove IP ACL criteria from the table.

Содержание AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AP-7131 Series

Ubiquiti M900 Quick Start Manual preview
M900
Бренд: Ubiquiti Страницы: 24
REXROTH efc series Instruction Manual preview
efc series
Бренд: REXROTH Страницы: 68
Wintech TDS510USB Plus Installation Manual preview
TDS510USB Plus
Бренд: Wintech Страницы: 21
Edgewater Networks 200EW/E Quick Start Manual preview
200EW/E
Бренд: Edgewater Networks Страницы: 7
3Com 3C13640 Installation Manual preview
3C13640
Бренд: 3Com Страницы: 32
Caton NVE 9100 User Manual preview
NVE 9100
Бренд: Caton Страницы: 18
LevelOne FSW-1641TX User Manual preview
FSW-1641TX
Бренд: LevelOne Страницы: 26
Intel IXP45X Developer'S Manual preview
IXP45X
Бренд: Intel Страницы: 958
Paradyne 1740 SHDSL User Manual preview
1740 SHDSL
Бренд: Paradyne Страницы: 74
Smacq Technologies PCI-1232 User Manual preview
PCI-1232
Бренд: Smacq Technologies Страницы: 22
Ebyte ECAN-W01 User Manual preview
ECAN-W01
Бренд: Ebyte Страницы: 23
Cowlacious Designs ISD CAP 275 Manual preview
ISD CAP 275
Бренд: Cowlacious Designs Страницы: 8
Multi-Link Power Stone Programming Manual preview
Power Stone
Бренд: Multi-Link Страницы: 31
MicroNova O047 Technical Installation Manual preview
O047
Бренд: MicroNova Страницы: 113
InHand IR615-S Series User Manual preview
IR615-S Series
Бренд: InHand Страницы: 69
Alphacool NexXxoS GPX-N 1070-M08 Instruction Manual preview
NexXxoS GPX-N 1070-M08
Бренд: Alphacool Страницы: 4
Aaeon FWS-7811 Manual preview
FWS-7811
Бренд: Aaeon Страницы: 100
Hameg HM6050-2K Manual preview
HM6050-2K
Бренд: Hameg Страницы: 46

Бренды по названию

Популярные бренды

Загрузить еще бренды