manualshive.com logo in svg

Motorola AP-7131 Series, Справочное руководство

Motorola AP-7131 Series - это надежное и мощное сетевое оборудование для вашего бизнеса. Установочное руководство и другие руководства пользователя можно скачать бесплатно с {сайт}, чтобы быстро настроить и использовать ваше устройство. Улучшите свою сеть с Motorola AP-7131 Series уже сегодня!

Поделиться
Скачать
background image

Device Configuration 5 - 43

Antenna Gain

Set the antenna from 0.00 - 30.00 dBm. The access point’s 

Power Management Antenna 

Configuration File

 (PMACF) automatically configures the access point’s radio transmit 

power based on the antenna type, its antenna gain (provided here) and the deployed 
country’s regulatory domain restrictions. Once provided, the access point calculates the 
power range. Antenna gain relates the intensity of an antenna in a given direction to the 
intensity that would be produced ideally by an antenna that radiates equally in all 
directions (isotropically), and has no losses. Although the gain of an antenna is directly 
related to its directivity, its gain is a measure that takes into account the efficiency of the 
antenna as well as its directional capabilities. Motorola Solutions recommends that only 
a professional installer set the antenna gain. The default value is 0.00.

Antenna Mode

Set the number of transmit and receive antennas on the access point. 1x1 is used for 
transmissions over just the single “A” antenna. 2x2 is used for transmissions and receipts 
over two antennas for dual antenna models. 1xAll is used when transmission occurs on 
one antenna and is received on all receiving antennas. The default setting is dynamic 
based on the access point model deployed and its transmit power settings.

Enable Antenna Diversity

Select this option to enable the radio to have antenna diversity for transmit frames at non 
802.11n data rates. This setting is disabled by default.

Wireless Client Power

Select this option to manually set the radio’s transmission power (in dBm) to connected 
clients. The setting is disabled by default.

Dynamic Chain Selection

Select this option for the radio to dynamically change the number of transmit chains. This 
option is enabled by default. 

Data Rates

Once the radio band is provided, the drop-down menu populates with rate options 
depending on the 2.4 or 5.0 GHz band selected. If the radio band is set to 

Sensor

 or 

Detector

, the Data Rates drop-down menu is not enabled, as the rates are fixed and not 

user configurable. If 2.4 GHz is selected as the radio band, select separate 802.11b, 
802.11g and 802.11n rates and define how they are used in combination. If 5.0 GHz is 
selected as the radio band, select separate 802.11a and 802.11n rates then define how 
they are used together. When using 802.11n (in either the 2.4 or 5.0 GHz band), Set a MCS 
(modulation and coding scheme) in respect to the radio’s channel width and guard 
interval. A MCS defines (based on RF channel conditions) an optimal combination of 8 
data rates, bonded channels, multiple spatial streams, different guard intervals and 
modulation types. Clients can associate as long as they support basic MCS (as well as 
non-11n basic rates).

For more information on the 802.11n rates, see section 

MCS Data Rates on page 5-49

.

Radio Placement

Use the drop-down menu to specify whether the radio is located 

Indoors

 or 

Outdoors

. The 

placement should depend on the country of operation selected and its regulatory domain 
requirements for radio emissions. The default setting is Indoors.

Max Clients

Use the spinner control to set a maximum permissible number of clients to connect with 
this access point radio. The available range is from 1- 256 for AP6522, AP6522M, AP6532, 
AP6562, AP8132, AP8232, AP7131, AP7181 and AP7161 models and from 1-128 for 
AP6511 and AP6521 models.

Rate Selection Methods

Use the drop-down menu to specify the algorithm to use for rate selection. Select 

Standard 

to use the standard rate selection algorithm. Select 

Opportunistic

 to use the 

Opportunistic rate selection algorithm.

Содержание AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AP-7131 Series

OCCITALINA OXTOPUS EIA-709 User Manual preview
OXTOPUS EIA-709
Бренд: OCCITALINA Страницы: 54
Barco ImagePRO-HD Installation Manual preview
ImagePRO-HD
Бренд: Barco Страницы: 121
Orban OPTIMOD 6300 Operating Manual preview
OPTIMOD 6300
Бренд: Orban Страницы: 255
Stephen STES2026 Configuration Manual Manual preview
STES2026
Бренд: Stephen Страницы: 102
PaloAlto Networks ION 1200 Series Hardware Reference Manual preview
ION 1200 Series
Бренд: PaloAlto Networks Страницы: 90
Balluff BIC 1I12-P2A25-M30MI1-BPX05-110 User Manual preview
BIC 1I12-P2A25-M30MI1-BPX05-110
Бренд: Balluff Страницы: 12
Aztech DSL5068EN(1T1R) User Manual preview
DSL5068EN(1T1R)
Бренд: Aztech Страницы: 40
Daedalon EC-33 Instruction Manual preview
EC-33
Бренд: Daedalon Страницы: 6
Kontron 50099 067 User Manual preview
50099 067
Бренд: Kontron Страницы: 42
Hauppauge WinTV USB Installation And Reference Manual preview
WinTV USB
Бренд: Hauppauge Страницы: 55
Ubiquiti UniFi WiFi BaseStation XG Quick Start Manual preview
UniFi WiFi BaseStation XG
Бренд: Ubiquiti Страницы: 19
CG Emotron OSTO 100 Instruction Manual preview
Emotron OSTO 100
Бренд: CG Страницы: 112
Tripp Lite N310-30M Specification Sheet preview
N310-30M
Бренд: Tripp Lite Страницы: 2
ADS Technologies API-800 Installation Manual preview
API-800
Бренд: ADS Technologies Страницы: 21
CopperOptics 150-1342-01 Manual preview
150-1342-01
Бренд: CopperOptics Страницы: 12
RR-Concepts StationMaster Manual preview
StationMaster
Бренд: RR-Concepts Страницы: 12
Omron G3RV-SL500-A Manual preview
G3RV-SL500-A
Бренд: Omron Страницы: 14
Alloy POEGE24T User Manual preview
POEGE24T
Бренд: Alloy Страницы: 13

Бренды по названию

Популярные бренды

Загрузить еще бренды