Motorola AP-7131 Series, Справочное руководство

Страница: 724 / 954

12 - 42 WiNG 5.5 Access Point System Reference Guide
9. Define the following configuration parameters required for the Export of the trustpoint:
10. Select OK to export the trustpoint. Select Cancel to revert the screen to its last saved configuration.
11. To optionally delete a trustpoint, select the Delete button from the Trustpoints screen. Provide the trustpoint name within
the Delete Trustpoint screen and optionally select the Delete RSA Key option to remove the RSA key along with the
trustpoint. Select OK to proceed with the deletion, or Cancel to revert to the last saved configuration.
12.2.2 RSA Key Management
Certificates
Refer to the RSA Keys screen to review existing RSA key configurations that have been applied to managed devices. If an
existing key does not meet the needs of a pending certificate request, generate a new key or import or export an existing key
to and from a remote location.
Rivest, Shamir, and Adleman (RSA) is an algorithm for public key cryptography. It’s an algorithm that can be used for certificate
signing and encryption. When a device trustpoint is created, the RSA key is the private key used with the trustpoint.
To review existing device RSA key configurations, generate additional keys or import/export keys to and from remote locations:
Trustpoint Name Enter the 32 character maximum name assigned to the target trustpoint. The trustpoint
signing the certificate can be a certificate authority, corporation or individual.
URL Provide the complete URL to the location of the trustpoint. If needed, select Advanced to
expand the dialog to display network address information to the location of the target
trustpoint. The number of additional fields that populate the screen is dependent on the
selected protocol.
Protocol Select the protocol used for exporting the target trustpoint. Available options include:
• tftp
• ftp
• sftp
• http
• cf
• usb1
• usb2
• usb3
• usb4
Port If using Advanced settings, use the spinner control to set the port. This option is not valid
for cf and usb1 - 4.
IP Address If using Advanced settings, enter IP address of the server used to export the trustpoint.
This option is not valid for cf and usb1 - 4.
Hostname If using Advanced settings, provide the hostname of the server used to export the
trustpoint. This option is not valid for cf and usb1 - 4.
Username/Password These fields are enabled if using ftp or sftp protocols. Specify the username and the
password for that username to access the remote servers using these protocols.
Path If using Advanced settings, specify the path to the trustpoint. Enter the complete relative
path to the file on the server.