manualshive.com logo in svg

Motorola AP-7131 Series, Справочное руководство

Motorola AP-7131 Series - это надежное и мощное сетевое оборудование для вашего бизнеса. Установочное руководство и другие руководства пользователя можно скачать бесплатно с {сайт}, чтобы быстро настроить и использовать ваше устройство. Улучшите свою сеть с Motorola AP-7131 Series уже сегодня!

Поделиться
Скачать
background image

5 - 26 WiNG 5.5 Access Point System Reference Guide 

16. Set the following 

802.1X Settings

:

17. Select the

 

Enable

 option within the

 802.1x supplicant (client) feature 

to enable a username and password pair to be 

used when authenticating users on this port. Use the 

Show

 option to view the actual characters comprising the password 

entered in the 

Password

 field.

18. Select the 

Spanning Tree

 tab.

Spanning Tree Protocol

 (STP) (IEEE 802.1D standard) configures a meshed network for robustness by eliminating loops 

within the network and calculating and storing alternate paths to provide fault tolerance.

STP calculation happens when a port comes up. As the port comes up and STP calculation happen, the port is set to 

Blocked

 

state. In this state, no traffic can pass through the port. Since STP calculations take up to a minute to complete, the port is 
not operational there by effecting the network behind the port. Once the STP calculation is complete, the port's state is 
changed to 

Forwarding

 and traffic is allowed.

Rapid Spanning Tree Protocol

 (RSTP) (IEEE 802.1w standard) is an evolution over the standard STP where the primary aim 

was to reduce the time taken to respond to topology changes while being backward compatible with STP.

 PortFast

 quickly 

changes the port state from 

Blocked

 to 

Forwarding

 to allow traffic while the STP calculation occurs.

NOTE: 

Some vendor solutions with VRRP enabled send ARP packets with Ethernet 

SMAC as a physical MAC and inner ARP SMAC as VRRP MAC. If this configuration is 
enabled, a packet is allowed, despite a conflict existing.

Host Mode 

Use the drop-down menu to select the host mode configuration to apply to this port. Options 
include 

single-host

 or 

multi-host

. The default setting is single-host.

Guest VLAN

Specify a guest VLAN for this port from 1 - 4094. This is the VLAN traffic is bridged on if this 
port is unauthorized and the guest VLAN is globally enabled.

Port Control

Use the drop-down menu to set the port control state to apply to this port. Options include 

force-authorized

, 

force-unauthorized 

and 

automatic

. The default setting is port-authorized.

Re Authenticate 

Select this setting to force clients to reauthenticate on this port. The default setting is disabled, 
thus clients do not need to reauthenticate for connection over this port until this setting is 
enabled.

Max Reauthenticate 
Count

Set the maximum reauthentication attempts (1 - 10) before this port is moved to unauthorized. 
The default setting is 2.

Maximum Request

Set the maximum number of authentication requests (1 - 10) before returning a failed message 
to the requesting client. The default setting is 2.

Quiet Period 

Set the quiet period for this port from 1 - 65,535 seconds. This is the maximum wait time 802.1x 
waits upon a failed authentication attempt. The default setting is 60 seconds.

Reauthenticate 
Period

Use the spinner control to set the reauthentication period for this port from 1 - 65,535 seconds. 
The default setting is 60 seconds.

Port MAC 
Authentication

When enabled, a port’s MAC address is authenticated, as only one MAC address is supported 
per wired port. When successfully authenticated, packets from the source are processed. 
Packets from all other sources are dropped. Port MAC authentication is supported on RFS4000, 
RFS6000 model controllers and NX4500, NX6500 and NX9000 series service platforms.

Port MAC authentication may be enabled on ports in conjunction with Wired 802.1x settings 
for a MAC Authentication AAA policy. 

Содержание AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AP-7131 Series

D-Link DSL-500 Command Reference Manual preview
DSL-500
Бренд: D-Link Страницы: 15
D-Link DWL-G550 Product Data Sheet preview
DWL-G550
Бренд: D-Link Страницы: 2
DBM ACE9600 Operating Manual preview
ACE9600
Бренд: DBM Страницы: 50
Hama 39707 Operating Instruction preview
39707
Бренд: Hama Страницы: 4
Xinje XG Series User Manual preview
XG Series
Бренд: Xinje Страницы: 76
Salto Node Installation Manual preview
Node
Бренд: Salto Страницы: 2
Analog Devices Linear SCP-LT8362-S-EVALZ Demo Manual preview
Linear SCP-LT8362-S-EVALZ
Бренд: Analog Devices Страницы: 8
Baldor Modbus Plus Installation And Operating Manual preview
Modbus Plus
Бренд: Baldor Страницы: 34
Longshine LCS-8131G3 User Manual preview
LCS-8131G3
Бренд: Longshine Страницы: 27
UfiSpace S9600-64X Hardware Installation Manual preview
S9600-64X
Бренд: UfiSpace Страницы: 35
Point of View SmartTV 210 User Manual preview
SmartTV 210
Бренд: Point of View Страницы: 13
ETAS BR-XETK-S4.0 User Manual preview
BR-XETK-S4.0
Бренд: ETAS Страницы: 82
MSNswitch UIS-322b Quick Installation Manual preview
UIS-322b
Бренд: MSNswitch Страницы: 2
Logicube ZCLONE User Manual preview
ZCLONE
Бренд: Logicube Страницы: 56
Connectland CR-CNL-FAST-R Installation Manual preview
CR-CNL-FAST-R
Бренд: Connectland Страницы: 10
Radica Games DAVID-II 716 Operating And Maintenance Instruction Manual preview
DAVID-II 716
Бренд: Radica Games Страницы: 40
Airvana ipBTS C30 Installation And Commissioning Manual preview
ipBTS C30
Бренд: Airvana Страницы: 90
Renesas HD74HCT1G04 Datasheet preview
HD74HCT1G04
Бренд: Renesas Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды