manualshive.com logo in svg

Motorola AP-7131 Series, Справочное руководство

Motorola AP-7131 Series - это надежное и мощное сетевое оборудование для вашего бизнеса. Установочное руководство и другие руководства пользователя можно скачать бесплатно с {сайт}, чтобы быстро настроить и использовать ваше устройство. Улучшите свою сеть с Motorola AP-7131 Series уже сегодня!

Поделиться
Скачать
background image

6 - 56 WiNG 5.5 Access Point System Reference Guide 

7. Set the following

 Upstream Random Early Detection Threshold

 settings for each access category. An early random 

drop is conducted when the amount of tokens for a traffic stream falls below the set threshold for the selected WLAN.

8. Configure the following parameters in respect to the WLAN’s intended 

Downstream Rate Limit

, or traffic from wireless 

clients to associated access point radios:

Maximum Burst Size

Set a maximum burst size from 2 - 1024 kbytes. The smaller the burst, the less likely the 
upstream packet transmission will result in congestion for the WLAN’s wireless client 
destinations. By trending the typical number of ARP, broadcast, multicast and unknown 
unicast packets over a period of time, the average rate for each access category can be 
obtained. Once a baseline is obtained, administrators should then add a minimum of a 
10% margin to allow for traffic bursts at the site. The default burst size is 320 kbytes.

Background Traffic 

Set a percentage for WLAN background traffic in the upstream direction. This is a 
percentage of the maximum burst size for low priority traffic. Background traffic exceeding 
the defined threshold is dropped and a log message is generated. Background traffic 
consumes the least bandwidth of any access category, so this value can be set to a lower 
value once a general upstream rate is known by the network administrator (using a time 
trend analysis). The default threshold is 50%.

Best Effort Traffic

Set a percentage for WLAN best effort traffic in the upstream direction. This is a 
percentage of the maximum burst size for normal priority traffic. Best effort traffic 
exceeding the defined threshold is dropped and a log message is generated. Best effort 
traffic consumes little bandwidth, so this value can be set to a lower value, once a general 
upstream rate is known by the network administrator (using a time trend analysis). The 
default threshold is 50%.

Video Traffic 

Set a percentage for WLAN video traffic in the upstream direction. This is a percentage of 
the maximum burst size for video traffic. Video traffic exceeding the defined threshold is 
dropped and a log message is generated. Video traffic consumes significant bandwidth, 
so this value can be set to a higher value once a general upstream rate is known by the 
network administrator (using a time trend analysis). The default threshold is 25%.

Voice Traffic

Set a percentage for WLAN voice traffic in the upstream direction. This is a percentage of 
the maximum burst size for voice traffic. Voice traffic exceeding the defined threshold is 
dropped and a log message is generated. Voice applications consume significant 
bandwidth, so this value can be set to a higher value once a general upstream rate is 
known by the network administrator (using a time trend analysis). The default threshold is 
0%.

Enable

Select this radio button to enable rate limiting for data transmitted from access point 
radios to associated wireless clients. Enabling this option does not invoke rate limiting for 
data traffic in the upstream direction. This feature is disabled by default.

Rate

Define an upstream rate limit from 50 - 1,000,000 kbps.This limit constitutes a threshold 
for the maximum the number of packets transmitted or received over the WLAN (from all 
access categories). Traffic that exceeds the defined rate is dropped and a log message is 
generated. The default setting is 5,000 kbps.

Содержание AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AP-7131 Series

Ubiquiti M900 Quick Start Manual preview
M900
Бренд: Ubiquiti Страницы: 24
3Com Server User Manual preview
Server
Бренд: 3Com Страницы: 48
IBM 51 Troubleshooting Manual preview
51
Бренд: IBM Страницы: 248
Wave wifi EC Series Quick Start Manual preview
EC Series
Бренд: Wave wifi Страницы: 2
F5 WANJet 500 Quick Start Card preview
WANJet 500
Бренд: F5 Страницы: 2
F5 ARX-500 Hardware Reference Manual preview
ARX-500
Бренд: F5 Страницы: 90
F5 ARX-4000 Parts Replacement Manual preview
ARX-4000
Бренд: F5 Страницы: 47
Z3 Technology Z3-DM8168-PCI-RPS Manual preview
Z3-DM8168-PCI-RPS
Бренд: Z3 Technology Страницы: 20
Z3 Technology Z3-DM8107-SDI2-RPS User Manual preview
Z3-DM8107-SDI2-RPS
Бренд: Z3 Technology Страницы: 75
Z-Wave USB Dongle User Manual preview
USB Dongle
Бренд: Z-Wave Страницы: 13
Ubee DVW3201B User Manual preview
DVW3201B
Бренд: Ubee Страницы: 9
Black Box JPM083A Manual preview
JPM083A
Бренд: Black Box Страницы: 9
Nvidia nForce 680I LT SLI Hardware User Manual preview
nForce 680I LT SLI
Бренд: Nvidia Страницы: 80
EVOC 6336-STG-YX Manual preview
6336-STG-YX
Бренд: EVOC Страницы: 57
ETAS BR-XETK-S4.0 User Manual preview
BR-XETK-S4.0
Бренд: ETAS Страницы: 82
Delta Electronics Through Hole Power Inductors 1411 Product Specifications preview
Through Hole Power Inductors 1411
Бренд: Delta Electronics Страницы: 1
Crystal Vision TANDEM HD-21 User Manual preview
TANDEM HD-21
Бренд: Crystal Vision Страницы: 54
eWON 2101CD Installation Manual preview
2101CD
Бренд: eWON Страницы: 34

Бренды по названию

Популярные бренды

Загрузить еще бренды