manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Руководство по продукции, Страница: 686 / 698

Поделиться
Скачать
Motorola AP 5131 - Wireless Access Point Скачать руководство пользователя страница 686

AP-51xx Access Point Product Reference Guide

B-20

B.3 Replacing an AP-4131 with an AP-5131 or AP-5181

The access point’s modified default configuration enables an AP-5131or AP-5181 to not only operate 
in a single-cell environment, but also function as a replacement for legacy AP-4131 model access 
points. You cannot port an AP-4131’s configuration file to an AP-5131 or AP-5181, but you can 
configure an AP-5131 or AP-5181 similarly and provide an improved data rate and feature set.

An AP-4131 has only one LAN port and it is defaulted to DHCP/BOOTP enabled. The AP-5131 and 
AP-5181 are optimized for single-cell deployment, so the customer to use either as a ”drop-in” 
replacement for an existing AP-4131 deployment. However, to optimally serve as a replacement for 
existing AP-4131 deployments, an AP-5131 and AP-5181’s “out-of-box” defaults are now set as 
follows:

•

The LAN1 port must default to DHCP client mode

•

The LAN2 port must default to DHCP server mode

•

The WAN port must default to Static mode.

•

The default gateway now defaults to LAN1.

•

The interface parameter has been removed from the Auto Update configuration feature.

•

The WAN interface now has http/telnet/https/ssh connectivity enabled by default.

Содержание AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов