manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Руководство по продукции, Страница: 182 / 698

Поделиться
Скачать
Motorola AP 5131 - Wireless Access Point Скачать руководство пользователя страница 182

AP-51xx Access Point Product Reference Guide

5-34

6.

Click

 Apply 

to save any changes to the WLAN screen. Navigating away from the screen 

without clicking Apply results in all changes to the screens being lost.

7.

Click 

Cancel 

to securely exit the New WLAN or Edit WLAN screen and return to the 

Wireless Configuration screen. 

5.3.1.1 Configuring WLAN Security Policies

As WLANs are being defined for an access point, a security policy can be created or an existing policy 
edited (using the 

Create

 or 

Edit

 buttons within the 

Security Configuration 

screen) to best serve the 

Disallow MU to MU 
Communication

The MU-MU Disallow feature prohibits MUs from communicating 
with each other even if they are on different WLANs, assuming one 
of the WLAN’s is configured to disallow MU-MU communication. 
Therefore, if an MU’s WLAN is configured for MU-MU disallow, it 
will not be able to communicate with any other MUs connected to 
this access point.

Use Secure Beacon

Select the 

Use Secure Beacon 

checkbox to not transmit the 

access point’s ESSID. If a hacker tries to find an ESSID via an MU, 
the ESSID does not display since the ESSID is not in the beacon. 
Motorola recommends keeping the option enabled to reduce the 
likelihood of hacking into the WLAN.

Accept Broadcast 
ESSID

Select the 

Accept Broadcast ESSID

 checkbox to associate an 

MU that has a blank ESSID (regardless of which ESSID the access 
point is currently using). Sites with heightened security 
requirements may want to leave the checkbox unselected and 
configure each MU with an ESSID. The default is unselected, thus 
not allowing the acceptance of broadcast ESSIDs.

Quality of Service 
Policy

If QoS policies are undefined (none), select the 

Create 

button to 

launch the 

New QoS Policy 

screen. Use this screen to create a 

QoS policy, wherein data traffic for the new or revised WLAN can 
be prioritized to best suit the MU transmissions within that WLAN. 
For more information, see 

Setting the WLAN Quality of Service 

(QoS) Policy on page 5-39

.

CAUTION

When using the access point’s hotspot functionality, ensure MUs are 
re-authenticated when changes are made to the characteristics of a 
hotspot enabled WLAN, as MUs within the WLAN will be dropped 
from device association.

!

Содержание AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов