Motorola AP 5131 - Wireless Access Point Скачать руководство пользователя страница 213

Страница: 213 / 698

Network Management

5-65

Configure the

Bandwidth Share for Each WLAN

field to set a raw weight (for WLANs

using the Weighted Round-Robin option) for each WLAN. The weight% changes as the
weight is entered.

If a WLAN has not been enabled from the

Wireless

screen, it is not configurable using the

Bandwidth Management

screen. To enable a specific WLAN, see

Enabling Wireless

LANs (WLANs) on page 5-27

Click

Apply

to save any changes to the Bandwidth Management screen. Navigating away

from the screen without clicking Apply results in all changes to the screens being lost.

Click

Undo Changes

(if necessary) to undo any changes made. Undo Changes reverts the

settings displayed on the Bandwidth Management screen to the last saved configuration.

Click

Logout

to securely exit the Access Point applet. A prompt displays confirming the

logout before the applet is closed.

Weighted Round-
Robin

If selected, a weighting (prioritization) scheme (configured within
the QoS Configuration screen) is used to define which WLANs
receive

access point

resources first.

WLAN Name

Displays the name of the WLAN. This field is read-only. To change
the name of the WLAN, see

Creating/Editing Individual WLANs on

page 5-30

Weight

This column is not available unless

Weighted Round-Robin

selected. Assign a weight to each WLAN. This percentage equals
the

access point

bandwidth share for that WLAN when network

traffic is detected.

Weight (%)

This column is automatically updated with the appropriate WLAN
bandwidth share when the

Weight

is modified.

QoS Policy

Displays the name of the QoS policy defined for each WLAN within
the

Quality of Service for WLAN

screen. If no policy has been

set, the WLAN uses the default policy. For information on assigning
QoS policies for specific WLANs, see

Setting the WLAN Quality of

Service (QoS) Policy on page 5-39

Содержание AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание AP 5131 - Wireless Access Point

Отзывы:

Motorola AP 5131 - Wireless Access Point, Руководство по продукции, Страница: 213 / 698

Результаты поиска

Содержание AP 5131 - Wireless Access Point

Отзывы: